excite在creat results时出错
请问一下，我excite计算的过程中在creat result时出现错误，请问是什么原因？麻烦哪位指导一下Create Results: Begin (28 Jun 2012 20:19:45)
Standard Body Results: 1@ ABS None
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Transform results data to constant step size
GIDAS file Crankshafta.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshafta_MP_F.GID is created.
Standard Body Results: 1@ REL 80001 123456 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 80001:1 not stored in binary file - no gidas file created
WARNING: Data for 80001:2 not stored in binary file - no gidas file created
WARNING: Data for 80001:3 not stored in binary file - no gidas file created
WARNING: Data for 80001:4 not stored in binary file - no gidas file created
WARNING: Data for 80001:5 not stored in binary file - no gidas file created
WARNING: Data for 80001:6 not stored in binary file - no gidas file created
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 80001:1 not stored in binary file - no gidas file created
WARNING: Data for 80001:2 not stored in binary file - no gidas file created
WARNING: Data for 80001:3 not stored in binary file - no gidas file created
WARNING: Data for 80001:4 not stored in binary file - no gidas file created
WARNING: Data for 80001:5 not stored in binary file - no gidas file created
WARNING: Data for 80001:6 not stored in binary file - no gidas file created
Standard Body Results: 1@ ABS 80001 123456 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 80001:1 not stored in binary file - no gidas file created
WARNING: Data for 80001:2 not stored in binary file - no gidas file created
WARNING: Data for 80001:3 not stored in binary file - no gidas file created
WARNING: Data for 80001:4 not stored in binary file - no gidas file created
WARNING: Data for 80001:5 not stored in binary file - no gidas file created
WARNING: Data for 80001:6 not stored in binary file - no gidas file created
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 80001:1 not stored in binary file - no gidas file created
WARNING: Data for 80001:2 not stored in binary file - no gidas file created
WARNING: Data for 80001:3 not stored in binary file - no gidas file created
WARNING: Data for 80001:4 not stored in binary file - no gidas file created
WARNING: Data for 80001:5 not stored in binary file - no gidas file created
WARNING: Data for 80001:6 not stored in binary file - no gidas file created
Standard Body Results: 1@ ABS 90001 4 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
GIDAS file Crankshaft-90001-4a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshaft-90001-4a_MP_F.GID is created.
Standard Body Results: 1@ ABS 90004 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
GIDAS file Crankshaft-90004-1a.GID is created.
GIDAS file Crankshaft-90004-2a.GID is created.
GIDAS file Crankshaft-90004-3a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshaft-90004-1a_MP_F.GID is created.
GIDAS file Crankshaft-90004-2a_MP_F.GID is created.
GIDAS file Crankshaft-90004-3a_MP_F.GID is created.
Standard Body Results: 1@ ABS 90005 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
GIDAS file Crankshaft-90005-1a.GID is created.
GIDAS file Crankshaft-90005-2a.GID is created.
GIDAS file Crankshaft-90005-3a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshaft-90005-1a_MP_F.GID is created.
GIDAS file Crankshaft-90005-2a_MP_F.GID is created.
GIDAS file Crankshaft-90005-3a_MP_F.GID is created.
Standard Body Results: 1@ ABS 90006 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
GIDAS file Crankshaft-90006-1a.GID is created.
GIDAS file Crankshaft-90006-2a.GID is created.
GIDAS file Crankshaft-90006-3a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshaft-90006-1a_MP_F.GID is created.
GIDAS file Crankshaft-90006-2a_MP_F.GID is created.
GIDAS file Crankshaft-90006-3a_MP_F.GID is created.
Standard Body Results: 1@ ABS 90007 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
GIDAS file Crankshaft-90007-1a.GID is created.
GIDAS file Crankshaft-90007-2a.GID is created.
GIDAS file Crankshaft-90007-3a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshaft-90007-1a_MP_F.GID is created.
GIDAS file Crankshaft-90007-2a_MP_F.GID is created.
GIDAS file Crankshaft-90007-3a_MP_F.GID is created.
Standard Body Results: 1@ ABS 90008 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
GIDAS file Crankshaft-90008-1a.GID is created.
GIDAS file Crankshaft-90008-2a.GID is created.
GIDAS file Crankshaft-90008-3a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshaft-90008-1a_MP_F.GID is created.
GIDAS file Crankshaft-90008-2a_MP_F.GID is created.
GIDAS file Crankshaft-90008-3a_MP_F.GID is created.
Standard Body Results: 1@ ABS 90009 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
GIDAS file Crankshaft-90009-1a.GID is created.
GIDAS file Crankshaft-90009-2a.GID is created.
GIDAS file Crankshaft-90009-3a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/1@.SD1 file
period begin: 720
period end: 1440
increment: 1
Rotational axis for transformRelativeBodyResults is 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Crankshaft-90009-1a_MP_F.GID is created.
GIDAS file Crankshaft-90009-2a_MP_F.GID is created.
GIDAS file Crankshaft-90009-3a_MP_F.GID is created.
Standard Body Results: 2@ ABS None
Reading Data for Standard Body Results versus Time/Angle from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
Transform results data to constant step size
GIDAS file Blocka.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Blocka_MP_F.GID is created.
Standard Body Results: 2@ REL 300100 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 300100:1 not stored in binary file - no gidas file created
WARNING: Data for 300100:2 not stored in binary file - no gidas file created
WARNING: Data for 300100:3 not stored in binary file - no gidas file created
Reading Data for Standard Body Results versus Frequency from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 300100:1 not stored in binary file - no gidas file created
WARNING: Data for 300100:2 not stored in binary file - no gidas file created
WARNING: Data for 300100:3 not stored in binary file - no gidas file created
Standard Body Results: 2@ REL 300101 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 300101:1 not stored in binary file - no gidas file created
WARNING: Data for 300101:2 not stored in binary file - no gidas file created
WARNING: Data for 300101:3 not stored in binary file - no gidas file created
Reading Data for Standard Body Results versus Frequency from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 300101:1 not stored in binary file - no gidas file created
WARNING: Data for 300101:2 not stored in binary file - no gidas file created
WARNING: Data for 300101:3 not stored in binary file - no gidas file created
Standard Body Results: 2@ REL 300110 123 ALL
Reading Data for Standard Body Results versus Time/Angle from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 300110:1 not stored in binary file - no gidas file created
WARNING: Data for 300110:2 not stored in binary file - no gidas file created
Transform results data to constant step size
GIDAS file Block-300110-3r.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/2@.SD1 file
period begin: 720
period end: 1440
increment: 1
WARNING: Data for 300110:1 not stored in binary file - no gidas file created
WARNING: Data for 300110:2 not stored in binary file - no gidas file created
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Block-300110-3r_MP_F.GID is created.
Standard Body Results: 3@ ABS None
Reading Data for Standard Body Results versus Time/Angle from WORK@/3@.SD1 file
period begin: 720
period end: 1440
increment: 1
Transform results data to constant step size
GIDAS file Conrod1a.GID is created.
Reading Data for Standard Body Results versus Frequency from WORK@/3@.SD1 file
period begin: 720
period end: 1440
increment: 1
Transform results data to constant step size
Calculating FFT
Maginitude/phase calculation of result data, no window and 3000 upper frequency used
GIDAS file Conrod1a_MP_F.GID is created.
GeneralJointResults 4@
Reading Data for General Joint Results versus Time/Angle from WORK@/4@01.SD1 file
period begin: 720
period end: 1440
increment: 1
你这个警告吧，不是错误信息啊，我没有遇到这种问题 alexcooper2011 发表于 2012-6-28 21:15 static/image/common/back.gif
你这个警告吧，不是错误信息啊，我没有遇到这种问题
你好，但是出现了错误，如下
只是在这个转速下出现了错误，其他转速下没有出现这样的错误，请问是什么原因？谢谢
你换一下高级软件版本试过吗？ alexcooper2011 发表于 2012-6-29 06:56 static/image/common/back.gif
你换一下高级软件版本试过吗？
你好，没试过，我们这边没有更高版本的，你觉得又可能是版本的原因？ 之前遇到相似的情况，换高版本的就能计算下去了， alexcooper2011 发表于 2012-6-29 20:32 static/image/common/back.gif
之前遇到相似的情况，换高版本的就能计算下去了，
哦，麻烦能告诉一下哪有高版本的下载？ result control中计算的循环数是否在simulation control中？ DrLan 发表于 2012-7-1 17:46 static/image/common/back.gif
result control中计算的循环数是否在simulation control中？
蓝博士，下面是我的simulation control和result control填写的循环数，你看看，有什么问题，谢谢，你的意思是两者要填的循环数要一样吗？
没有问题。
频率结果，用impress chart中的FFT手工做吧。 DrLan 发表于 2012-7-1 22:25 static/image/common/back.gif
没有问题。
频率结果，用impress chart中的FFT手工做吧。
蓝博士，你的意思是由于上面的错误，而不能产生频率结果，必须手工去做，是吧？ 手工做吧。你上面填得没有错，可能是版本的问题。
页:
[1]