请教关于3D活塞的EPLC模拟滑套与滑块的问题
请教蓝博士及各位大师，我在用模拟3D活塞的那个EPLC模拟一个强制润滑的滑套滑块机构。
skirt高42mm，6层有限元节点；liner高114mm，23层有限元节点。每列缩减节点数相同，节点分布与下图类似，
模型的其他地方都无问题，在simulation一开始的时候就报以下错误：
2 Warning (Code 2210005)Connecting joint: RailGuid22Connected body: 23@Connecting nodes are arranged in a cylindrical mesh.The number of FE-nodes of two neighboring circumferential sections mustnot differ more than two.In section 3 the number of nodes is 12,in section 4 the number of nodes is 204.This occurs at 95.210deg w.r.t. the cylindrical coordinate systemdefined in 'Reference Data' in the joint dialog. User action: (a) Check the geometry of the nodes. (b) Check the node set specified in 'Connections'. (c) Check the 'Orientation of the Cylindrical Coordinate System' in 'Reference Data' of the joint dialog. 1 Error (Code 1630031)Extracting the FE-Structure of the defined models:The finite element structure could not be extracted. Connected body: 23@是滑块，如果我把connections里的Reverse body order勾选上，就会反过来报滑套的错，也是这种报错。
会excite润滑吗 问题已解决。要把模型的中心线调整到与极轴重合，再缩减
页:
[1]