tx2443826038 发表于 2018-7-5 10:06:22

Hypermesh导入Ansys模型

把Ansys模型导入Hypermesh中，遇到错误，请问各位是怎么解决的？

错误如下：

Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Warning:No ET card defined for the Element id # '3012096' Type = '10298'.
                Resolution:The element is not processed. The element has been written to hmx file.
Summary:Feinput finished with 1 errors and 85818 warnings.

ZHDBIT 发表于 2018-7-17 09:56:41

没有设置ET类型？

风轻云淡TNT 发表于 2019-3-25 10:40:18

请问怎么导入ANSYS的几何模型？？？

焚琴煮鹤丨 发表于 2019-8-9 17:11:12

需要先设置ET Types，然后在Utility-component manager中把component设置对应的ET Types
页: [1]
查看完整版本: Hypermesh导入Ansys模型