EDGE-BASED中，SOURC36建立的线圈区域需要单独建立吗？
换句话说，针对我现在做的具体模型（线圈缠绕在铁心上，周围由空气填充），用SOLID117建模的时候，就建出铁心和空气区域，线圈区域是不是就不用单独指出？接下来，用SOURC36剖分时，再通过三个节点以及DY、DZ建出线圈模型就好了？还是必须用SOLID117分别建出铁心、空气、线圈三个区域？ 为什么用36阿，单元省不了多少，还不够麻烦的
说说好处吧，用这个的朋友们 hello,wantfish
What you want to know is how to use Sourc36 to apply loading in a analysis with solid117, I guess, right?
the related rules are specified clearly in help:
1)Mesh the[color=Red] coil [/color]and[color=Red] surrounding region [/color]with [color=Red]SOLID117 elements[/color].
2)Define [color=Red]SOURC36 elements for each coil[/color].
3)Specifying the CUR real constant.
4)Solve. The current loading from SOURC36 will [color=Red]automatically[/color] be used by SOLID117.
you will master this method when you finish the VM241 perch88 :
Another reson why you use sourc36 is that you can ensure the loading rule:divJ=0. 斑竹,有个问题不明白,请问下使用source36单元,不就加载了电流吗?为什么还要建立线圈的模型呢? *******************************************************************
_______________________________
| |
| |
Sourc36 ( only to transer load ) | |
(Current)-------------------------------------> | Soli117+ edge based FEA model |
| |
| |
| |
|______________________________|
[[i] 本帖最后由 北极熊甲 于 2006-12-23 18:17 编辑 [/i]] 这个帖子很奇怪，使用solid117+sourc36，单元边法计算？
哪个例子这样做过？
页:
[1]