Edit Keywords运行出错exec\perl.exe’.exe not found
本帖最后由 zsq-w 于 2010-1-25 09:23 编辑google了好久都没得到正解。
最近练习Abaqus,我用的版本是 ABAQUS 6.8-1,32位,把刘展那本《ABAQUS 6.6基础教程与实例详解》翻的快差不多了。
里面的例子基本都做了一遍,可是其中两个涉及Edit Keywords的例子,都无法完成。
比如,全书的最后一个例子,分析弹丸侵蚀靶体的问题。
添加了靶体材料失效的判定准则数据之后。
提交job运行,就会显示错误:"E:\Program Files\ABAQUS\6.8-1\exec\perl.exe" .exe not found in PATH
而且,应该不会添加错,运行作者所提供的模型,同样会有此问题。
同样地,Write Input, Data Check也会显示这个错误,要命的是,想要再次Edit Keywords同样会出现这个错误。
我原本以为,应该是环境变量的问题,是不是在环境变量的PATH里面添加上exec文件夹就可以。
不幸的是,丝毫没有奏效,重启之后依然如此。
哪位曾经遇到过这个问题?或者知道这个问题该如何解决?麻烦指点,不胜感激。
[ 本帖最后由 acous 于 2008-11-11 15:58 编辑 ] Maybe you have to " discards all edits" in the edit keywords window and then add your desired keywords in your output inp file directly. 我也遇到了一模一样的问题,请高人指教 有没有高人指点啊? 折腾很久都没有搞定,是不是6.8版本的问题
在32位的windowsXP及64位的windowsvista中都有这个问题出现。 我也碰到这个问题,困扰了很久也没有解决,我用的也是6.8的版本,难道真是版本的问题? 错误提示
in keyword *CONFLICTS, file "eroding.inp", line 11092: Keyword *Conflicts is generated by Abaqus/CAE to highlight changes made via the Keywords Editor that conflict with changes made subsequently via the native GUI.
in keyword *CONFLICTS, file "eroding.inp", line 11154: Keyword *Conflicts is generated by Abaqus/CAE to highlight changes made via the Keywords Editor that conflict with changes made subsequently via the native GUI.
in keyword *CONFLICTS, file "eroding.inp", line 11157: Keyword *Conflicts is generated by Abaqus/CAE to highlight changes made via the Keywords Editor that conflict with changes made subsequently via the native GUI.
in keyword *CONFLICTS, file "eroding.inp", line 11092: The keyword is misplaced. It can be suboption for the following keyword(s)/level(s):
Analysis Input File Processor exited with an error.
请知道的告诉一下,谢谢了 in keyword *CONFLICTS, file "Job-impact.inp", line 93708: Keyword
*Conflicts is generated by Abaqus/CAE to highlight changes made via
the Keywords Editor that conflict with changes made subsequently via
the native GUI.
同样的问题,不知道上面的同志们搞定了没 天神啊,我也遇见这个问题了!一看版里的类似问题还真多啊!
其实原因非常简单,大家仔细看错误信息没?就是“‘...\exec\perl.exe’.exe not found”,注意看,在第一个.exe后面还有一个.exe,也就是说,abaqus以为这个文件应该是“perl.exe.exe”,而我们的安装目录下面都是“perl.exe”!!
所以,很简单,大家在perl.exe后面再加个.exe就行了。。。。。。
汗一个,真是麻烦啊。。。。。 8# duanjingyu
你瞎扯吧 证明了八楼的做法,确实瞎扯 同样遇到这个问题,纠结。。。。。。。。。。。。 同问敬请楼主出马 有谁解决这个问题了没,我也遇到了 我也遇到同样的问题麻烦指教 麻烦哪位高手解决一下!!很急啊 同样问题,待高人解决 我也遇到了同样的问题呢,急求解答
页:
[1]