岩土小天天 发表于 2010-3-10 09:07:47

adina不收敛原因及解决方法

adina不收敛原因及解决方法

wild_field 发表于 2010-3-10 09:50:32

这个是你自己总结整理的?

tonnyw 发表于 2010-3-10 11:15:10

2# wild_field [/b

"There are differentways to check if the solution is convergent.
1.
Using smaller load steps
2.
Using Full Newton Method instead of ModifiedNewton Method or BFG method2 3.
3.
Using Line Search
4.
Using ATS9 C
You can use any one of the aboveor you can combine all of them.% The mostconservative way I would suggest for your case is to use smaller load stepsplus Full Newton Method plus Line search. If the solution is not convergent,then using ATS plus Full Newton Method plus Line Search with bigger convergencetolerance. If the solution is still not converged, you should not expectconverged solution at all for your problem."
I may remember something wrong. But these above words seem like exactly what I wrote before in this forum.

fengqiguojun 发表于 2010-3-10 21:31:29

不收敛的因素很多啊

fengqiguojun 发表于 2010-3-10 21:49:22

可以考虑网格大小 时间步

wild_field 发表于 2010-3-11 11:13:10

本帖最后由 wild_field 于 2010-3-11 11:14 编辑

促成不收敛的因素很多,楼主主要讲了关于土木方向的一些经验,同理还可以引申到其他模型,具体问题还得具体分析,主要原因包括材料、网格、时间步及时间函数、边界条件、载荷等。
3楼给出了调试模型的一些方法。

zhangyanguo_85 发表于 2010-4-13 20:14:35

谢谢啊,分享了

jxhero 发表于 2010-5-16 14:07:10

非常不错的资料,感谢了!

jxhero 发表于 2010-5-16 14:09:20

怎么无法打开?

yinzhuchao85 发表于 2010-5-16 19:08:50

看看了 纯顶

linking1987 发表于 2010-5-27 08:28:23

感谢楼主分享~~~

lencholyue 发表于 2010-5-27 21:12:32

感谢楼主的无私分享

T-MACLeo 发表于 2010-5-27 21:48:45

学习,多谢LZ

maohongchuan 发表于 2010-6-9 13:00:45

向楼主学习

qq9812977 发表于 2010-6-11 10:28:52

不收敛的因素很多啊

fridecailei 发表于 2010-6-11 13:01:26

要是有机械结构FSI的就不错了

nickcoom 发表于 2010-6-11 14:46:29

不错,总结的不错……

luoxh523 发表于 2010-6-12 10:49:03

docx格式,我的还是03版的呢,看来落后了,得装07的才能看,先谢谢了!!

nicolee 发表于 2010-6-22 01:33:01

网格大小和时间步的关系是很重要的,但即使知道这个是导致问题是根本原因,实际上也很难在达到模拟要求的同时又使网格与时间步配合恰到好处是极其困难的。

vinson426 发表于 2010-6-26 20:20:49

好东西,看看先
页: [1] 2 3 4 5
查看完整版本: adina不收敛原因及解决方法