ESC求解报错。
版本:NX I-deas V5模块:ESC
机器配置:xp 64bit 4GB和xp 32bit 3GB
报错信息:
Thermal/Flow Analysis Software
==============================
MAYA Heat Transfer Technologies Ltd.
TMG Thermal/Flow 5.0.0March 1, 2007
Run directory specified for analysis:
D:\Scratch_NXI5\100528\
ID2ESC - Thermal/flow model file builder
======================================================================
Time: Fri May 28 14:30:11 2010
+--------------------------------------------------------------------+
| Model Builder |
+--------------------------------------------------------------------+
Reading model file...
**FATAL **
**Unable to allocate array 44 in routine fgetmem2. Trying to
**allocate 168017840. bytes,1805222032 bytes have already been
**allocated. Probable cause is insufficient swap space.
**FATAL **
**Run aborted due to errors.
+--------------------------------------------------------------------+
| END |
+--------------------------------------------------------------------+
Solution elapsed time: 00 min 23 sec 同问啊
我的机器内存是2G的,虚拟内存也是2G
在计算一个模型时,不考虑辐射能算。但一旦考虑辐射就出现了同样的问题
“i-deas insufficient swap space”
请问这该如何解决
页:
[1]