输出节点应力

xinruowuhen

请教optistruct计算完了，在hyperview中的云图为何没有节点应力，是不是要在control card中设置？

willmesh

这个应该在计算前就要设置吧，发个类似的教程
Step 10:  Create a Set of Nodes for Output of Results

1. From the Analysis page, enter the entity sets panel.

2. Click name = and enter SETA.

3. Click the switch below name and select no card image, instead of card image.

4. Leave the Set type: switch set to non-ordered type.

5. Make sure that the yellow entity: selection type box is set to nodes.

6. Select nodes with IDs 15, 17 and 19.

7. Click create.

A message appears stating: The entity set has been created.

8. Click return to exit the entity sets menu.

我是这么理解的，也是新手，仅供参考！

afeng1981

定义的节点结果应该是在curve里显示出来的，model上不会显示的
你需要导出定义节点的结果曲线