如何通过x,y,z坐标范围选取节点？

crywolf911

RTRT，ANSYS中是否可以同时限制x，y，z坐标的范围来选取节点？知道的高手指点一下，先谢了~

senja

查看命令nsel

silencecn

可以，但是要分成好几次，比如第一次选择X坐标，第二次选择Y坐标，但是这个时候要选择also select。当然你要根据需要选择那几个选项来达到你的目的Selection Function Setting

From Full: Select a new set of entities from the entire model.
Reselect: Replace the current set of entities with a subset of those entities.
Also Select: Select additional entities to add to the currently selected set of entities.
Unselect: Unselect entities from the currently selected set of entities.

hz11192000

silencecn 发表于 2011-11-21 22:39
可以，但是要分成好几次，比如第一次选择X坐标，第二次选择Y坐标，但是这个时候要选择also select。当然你 ...

in the second selection, not A , should be R.

crywolf911

hz11192000 发表于 2011-11-21 23:01
in the second selection, not A , should be R.

谢了，我明白了~