找回密码
 注册
Simdroid-非首页
查看: 788|回复: 13

[K文件] 材料失效准则参数在哪个关键字定义?

[复制链接]
发表于 2012-5-21 18:29:02 | 显示全部楼层 |阅读模式 来自 北京
小弟刚学,多谢指教
发表于 2012-10-27 17:37:36 | 显示全部楼层 来自 浙江杭州
Simdroid开发平台
护韶 发表于 2012-10-27 10:56
想问斑竹,怎么定义LINK160或者BEAM161单元的生死,因为*MAT_ADD_EROSION只能用于定义SOLID ...

新版本的关键字用户手册上有说明,可以用于梁单元的。
*MAT_ADD_EROSION
Many of the constitutive models in LS-DYNA do not allow failure and erosion. The  ADD_EROSION option provides a way of including failure in these models although the option
can also be applied to constitutive models with other failure/erosion criterion. Each of the  criterion defined here are applied independently, and once any one of them is satisfied, the element is deleted from the calculation. This option applies to nonlinear element formulations  including the 2D continuum, 3D solid elements, 3D shell elements, and the thick shell elements types 1 and 2. Beam types 1 and 11 currently support the erosion but not the damage and evolution models. In addition to erosion, damage initiation and evolution models are available as described in the remarks.
回复 1 不支持 0

使用道具 举报

发表于 2012-10-25 08:48:30 | 显示全部楼层 来自 福建福州
gdyu_yu 发表于 2012-5-21 20:24
可以在*MAT_ADD_EROSION中定义。

我在做桁梁的连续性倒塌模拟,要定义一根杆件先失效,我用*MAT_ADD_EROSION关键字来定义,使这根杆件在0.1秒失效移除,但是定义完后,这根杆件却没有被移除,或者说这个*MAT_ADD_EROSION没有发作用,想请教一下这个问题,望不吝赐教

回复 1 不支持 0

使用道具 举报

发表于 2012-5-21 20:24:34 | 显示全部楼层 来自 浙江杭州
可以在*MAT_ADD_EROSION中定义。
回复 不支持

使用道具 举报

 楼主| 发表于 2012-5-21 20:28:57 | 显示全部楼层 来自 北京
gdyu_yu 发表于 2012-5-21 20:24
可以在*MAT_ADD_EROSION中定义。

哦  谢谢大侠了,是在第一个参数设置吗?
回复 不支持

使用道具 举报

发表于 2012-5-21 20:32:30 | 显示全部楼层 来自 浙江杭州
minzufc 发表于 2012-5-21 20:28
哦  谢谢大侠了,是在第一个参数设置吗?

这个关键字涉及的卡片内容很多,你自己看手册的说明就清楚了。
p.s. 用这个关键字的话,建议看新版本的用户手册。比如971 R5或R6的手册。
回复 不支持

使用道具 举报

 楼主| 发表于 2012-5-21 20:56:33 | 显示全部楼层 来自 北京
gdyu_yu 发表于 2012-5-21 20:32
这个关键字涉及的卡片内容很多,你自己看手册的说明就清楚了。
p.s. 用这个关键字的话,建议看新版本的用 ...

好的 谢谢了
回复 不支持

使用道具 举报

发表于 2012-10-13 09:53:29 | 显示全部楼层 来自 清华大学学生宿舍
这个帖子很有帮助,仔细看过了
回复 不支持

使用道具 举报

发表于 2012-10-25 08:51:44 | 显示全部楼层 来自 福建福州
gdyu_yu 发表于 2012-5-21 20:24
可以在*MAT_ADD_EROSION中定义。

这是我的K文件,想请教哪里错了,
$
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$                             MATERIAL DEFINITIONS                             $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
*MAT_PLASTIC_KINEMATIC
         1 0.270E+04 0.700E+11  0.330000 0.126E+09 0.700E+09  0.00   
  0.00      0.00     0.250   
*MAT_PLASTIC_KINEMATIC
         2 0.270E+04 0.700E+11  0.330000 0.126E+09 0.700E+09  0.00   
  0.00      0.00     0.250
*MAT_ADD_EROSION
2,1234
-1,1234,1234,1234,1234,1234,1234,1234   
*MAT_ELASTIC
         3 0.780E+04 0.700E+14  0.330000       0.0       0.0       0.0
$
$
$
回复 不支持

使用道具 举报

发表于 2012-10-27 10:56:28 | 显示全部楼层 来自 福建福州
gdyu_yu 发表于 2012-5-21 20:32
这个关键字涉及的卡片内容很多,你自己看手册的说明就清楚了。
p.s. 用这个关键字的话,建议看新版本的用 ...

想问斑竹,怎么定义LINK160或者BEAM161单元的生死,因为*MAT_ADD_EROSION只能用于定义SOLID
回复 不支持

使用道具 举报

发表于 2012-10-27 17:38:04 | 显示全部楼层 来自 陕西西安
*MAT_ADD_EROSION 这个参数有两行参数,第一行:MID(MID - 待失效的材料编号),excl(排除数字,任意假设);第二行:PFAIL(失效压力),SIGPI(失效主应力),SIGVM(失效等效应力,一般指抗拉强度),EPSPI(失效主应变),EPSSH(失效剪应变),SIGTH(极限应力),IMPULSE(失效应力冲量),FAILTM(失效时间)。
其中excl为排除数字,这个数字可以任意定义,如果第二行某个参数和这个数据相同,那么该参数定义的失效准则就被忽略。(第二行可以定义很多准则)。不选用其它失效准则不能留空,必须要填排除数字。
回复 不支持

使用道具 举报

发表于 2019-4-18 22:37:12 | 显示全部楼层 来自 中国
混凝土材料用什么失效好呢?
回复 不支持

使用道具 举报

发表于 2020-5-22 12:51:46 | 显示全部楼层 来自 浙江
想问一下,如果想模拟钢索的失效,用什么失效要好一些
回复 不支持

使用道具 举报

发表于 2020-8-23 11:38:14 | 显示全部楼层 来自 河南焦作
*MAT_ADD_EROSION
回复 不支持

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|小黑屋|联系我们|仿真互动网 ( 京ICP备15048925号-7 )

GMT+8, 2024-3-29 14:02 , Processed in 0.036038 second(s), 12 queries , Gzip On, MemCache On.

Powered by Discuz! X3.5 Licensed

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表