Solidworks模型导入workbench是出现错误！望解答！

fansheng2010 · 发表于 2013-3-12 16:41:00

The following faces are higher order NURBS with many knots. These types of surfaces may lead to longer meshing times. If meshing time is long, changing your smoothing to low may help improve the meshing speed.

谢谢各位大侠！请讲解解决办法！

greendayk0620 · 发表于 2013-3-12 16:44:33

你的模型上有些面是破面，仔细检查检查，修复一下就OK了

zhangw2544 · 发表于 2016-8-24 22:23:35

如何修复，楼上

账号		自动登录	找回密码
密码			注册

账号		自动登录	找回密码
密码			立即注册

[几何模型] Solidworks模型导入workbench是出现错误！望解答！