接触分析无结果，求助各位大神

roujianpiaoxue

    我根据nas123_wk02_Pipe_crush-prted教程做了接触分析，但是没有结果。               前处理软件：MSC.patran，
               解算器MD.nastran -sol600。
                   fo6文件中，并无fatal信息，末尾只有下面的信息，不知道什么原因，求助各位大神。
                      M O D E L   S U M M A R Y

                                   NUMBER OF GRID     POINTS   =    13048

                                   NUMBER OF CHEXA    ELEMENTS =    11050


       ** SOL 600 Information Message - Default NODSEP of 5 set as feature,3105


       SOL 600 information message - setting SIZING fields 3 and 4 to        14353
       using environmental variable MSC_MEMM

A scratch directory has been appended to the Marc command line.  The new command line is
D:\Program Files\MSC.Software\MD_Nastran\20111\md20111\marc\tools/run_marc -jid E:\temp\conect.marc.dat -v no -iam mdnl  -sdir c:\scratch
Marc will be executed using the command:
D:\Program Files\MSC.Software\MD_Nastran\20111\md20111\marc\tools/run_marc -jid E:\temp\conect.marc.dat -v no -iam mdnl  -sdir c:\scratch


SOL 600 Marc command = D:\Program Files\MSC.Software\MD_Nastran\20111\md20111\marc\tools/run_marc -jid E:\temp\conect.marc.dat -v no -iam mdnl  -sdir c:\scratch


       Quotes have been added.  The final command is
"D:\Program Files\MSC.Software\MD_Nastran\20111\md20111\marc\tools/run_marc" -jid E:\temp\conect.marc.dat -v no -iam mdnl  -sdir "c:\scratch"



Final SOL 600 Marc command = "D:\Program Files\MSC.Software\MD_Nastran\20111\md20111\marc\tools/run_marc" -jid E:\temp\conect.marc.dat -v no -iam mdnl  -sdir "c:\scratch"

*** ISHELL PROGRAM 'D:\Program Files\MSC.Software\MD_Nastran\20111\md20111\marc\too' STARTED ***
error, program
\run_marc_read.exe
which reads the command line options does not exist
*** ISHELL PROGRAM 'D:\Program Files\MSC.Software\MD_Nastran\20111\md20111\marc\too' COMPLETED ***


            Nastran SOL 600 completed                                             

            See E:\temp\conect.marc.out  E:\temp\conect.marc.log  E:\temp\conect.marc.t16 for results                     



No PARAM values were set in the Control File.

1                                        * * * END OF JOB * * *


No Symbolic Replacement variables or values were specified.