操稳，稳态回转，侧向力平衡问题

厦门威迪思

求助各位大佬，做操稳稳态回转，用的事件构造器，平衡方式选SKID_PAD，模板可以过但是自己建的模型老是报错，错误如下，衬套、弹簧刚度，整车质量都有调整过，想请教还有可能是哪里出问题？

---- START: ERROR ----


Static equilibrium analysis has not been successful.
  The maximum number of iterations 25, has been reached.
  For the last attempted iteration:
  The equation with the largest error was model.ZX_body.ges_chassis Comp = 7 Error = 0.000008
  The variable receiving the largest increment was model.zx_rear_sus_no_bush.josfix_center_of_drive_axle Comp = 3 Delta = 575.797827.

huanying246

可能是约束问题，你看下是不是过约束了或者自由度过大了，也可以在设置里面把求解器换一下，误差调小一点

工大433

可以试试改变档位。

ipqpvss

换一下轮胎模型，应该可以算过