本帖最后由 dsfzkjlt 于 2019-12-27 16:59 编辑
ABAQUS/Standard为用户提供了大量的用户子程序,使他们能够使ABAQUS适应其特定的分析需求。ABAQUS/标准用户手册第24章详细介绍了ABAQUS/Standard中提供的所有40个用户子程序。一些流行的用户子程序包括:1.CREEP: Define time-dependent, viscoplastic behavior (creep and swelling). 定义和时间相关的、粘塑性的运动(蠕变和膨胀)。 2.DLOAD: Specify nonuniform distributed loads. 指定非均匀的分布载荷。 3.FILM: Define nonuniform film coefficient and associated sink temperatures for heat transfer analysis. 对热传递分析指定非均匀的膜层散热系数和联合的散热器温度。 4.FRIC: Define frictional behavior for contact surfaces. 对接触面定义摩擦。 5.HETVAL: Provide internal heat generation in heat transfer analysis. 在热传递分析中提供初始热。 6.UEL: Define an element. 定义单元。 7.UEXPAN: Define incremental thermal strains. 定义增加的热应变。 8.UEXTERNALDB: Manage user-defined external databases and calculate model-independent history information. 管理用户定义的外部数据和计算与模型无关的历史资料。 9.UGENS: Define the mechanical behavior of a shell section. 定义一个壳截面的机械运动。 10.UMAT: Define a material’s mechanical behavior 定义材料的机械运动。 11.UPOREP: Define initial fluid pore pressure. 定义初始孔隙流压力。 12.URDFIL: Read the results file. 读取结果文件。 13.USDFLD: Redefine field variables at a material point. 再一次定义材料场变量。 14.UWAVE: Define wave kinematics for an ABAQUS/Aqua analysis. 对ABAQUS/AQUA分析定义波浪运动。 参考:https://wenku.baidu.com/view/1c64b6e9b8f67c1cfad6b894.html及https://www.cnblogs.com/baowee/p/9556826.html#abaqusstandard-subroutines 章节目录: Lecture 1 Introduction
Lecture 2 User Subroutine: DLOAD
Lecture 3 User Subroutine: FILM
Lecture 4 User Subroutine: USDFLD
Lecture 5 User Subroutine: URDFIL
Lecture 6 Writing a UMAT or VUMAT
Lecture 7 Creating a Nonlinear User Element
Workshops
总之一句话,讲得很详细,欢迎大家下载研究。。。。。 另外一些子程序视频可移步:https://www.bilibili.com/video/av64639911
|