- 积分
- 0
- 注册时间
- 2006-10-27
- 仿真币
-
- 最后登录
- 1970-1-1
|
楼主 |
发表于 2006-11-14 10:51:49
|
显示全部楼层
来自 湖南湘潭
用6.5重复了一下你在这个网址提供的例子,主要是在input file 中定义了cohesive 单元的材料性质,和截面性质,能够运行了,但是似乎没有出现裂纹。我想是我某些定义的问题吧
http://www.simwe.com/forum/viewt ... =cohesive%2Belement
但是你在这里提供的例子,我却怎么也做不出来,总是出现下面的错误
in keyword *CONFLICTS, file "Job-2.inp", line 554: Keyword *Conflicts is generated by ABAQUS/CAE to highlight changes made via the Keywords Editor that conflict with changes made subsequently via the native GUI.
in keyword *CONFLICTS, file "Job-2.inp", line 589: Keyword *Conflicts is generated by ABAQUS/CAE to highlight changes made via the Keywords Editor that conflict with changes made subsequently via the native GUI.
in keyword *CONFLICTS, file "Job-2.inp", line 596: Keyword *Conflicts is generated by ABAQUS/CAE to highlight changes made via the Keywords Editor that conflict with changes made subsequently via the native GUI.
in keyword *CONFLICTS, file "Job-2.inp", line 554: The keyword is misplaced. It can be suboption for the following keyword(s):
于是决定看document files,有一点收获,但好像解决不了我遇到的问题,于是决定装6.6的试试看了
我想这样会方便很多,也请dava以后多多指点 |
|