找回密码
 注册
Simdroid-非首页
查看: 113|回复: 2

[接触分析] 我该如何确定接触区域?

[复制链接]
发表于 2007-7-2 11:00:10 | 显示全部楼层 |阅读模式 来自 天津
问题描述:一圆柱壳体外加若干加强箍,箍与壳体之间存在预应力。
疑问:如何确定接触区域。
模型(1/4):见附件。

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注册

×
发表于 2007-7-2 11:08:56 | 显示全部楼层 来自 加拿大

回复 #1 chinayangpeizhi 的帖子

Simdroid开发平台
the contacted surfaces should be between the inside surfaces of the reinforcing rings and the outside surfaces of the cylinder.

It is suggested to avoid partitioning/dividing the cylinder, which is better assumed to be  an intact contact surface or treated as target surface.
回复 不支持

使用道具 举报

 楼主| 发表于 2007-7-2 17:09:10 | 显示全部楼层 来自 天津

回复 #2 jinqinghai 的帖子

谢谢版主,我照你说的做做看。
回复 不支持

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|小黑屋|联系我们|仿真互动网 ( 京ICP备15048925号-7 )

GMT+8, 2024-3-29 18:14 , Processed in 0.039994 second(s), 14 queries , Gzip On, MemCache On.

Powered by Discuz! X3.5 Licensed

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表