找回密码
 注册
Simdroid-非首页
查看: 211|回复: 4

[岩土专版] 请教,莫尔-库仑模型中的tensile cut-off limitted是什么参数

[复制链接]
发表于 2007-12-20 11:01:32 | 显示全部楼层 |阅读模式 来自 江苏南京
发表于 2007-12-20 11:27:31 | 显示全部楼层 来自 湖北武汉
Simdroid开发平台
tensile cut-off limitted
用金山翻译一下就知道了
回复 不支持

使用道具 举报

发表于 2007-12-20 22:38:44 | 显示全部楼层 来自 北京
ADINA中的M-C准则好像很难收敛呀
大家在用M-C准则的时候一般怎么设置呀?
才能保证有较好的收敛
回复 不支持

使用道具 举报

发表于 2007-12-23 11:41:36 | 显示全部楼层 来自 陕西西安
该参数是基于Rankine准则与M-C准则的组合,下面是说明:
Stress states beyond the tension cut-off value T are not
possible. When this limit is reached or exceeded, the Maximum-Tensile-Stress Criterion (Rankine) is applied by shifting the hydrostatic stress pressure corresponding to the tension cut-off. The tensio off value T is three times as large as the tensile strength of the material.
回复 不支持

使用道具 举报

发表于 2007-12-23 12:06:01 | 显示全部楼层 来自 四川成都
tensile cut-off limitted____ 拉伸破断极限
回复 不支持

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|小黑屋|联系我们|仿真互动网 ( 京ICP备15048925号-7 )

GMT+8, 2024-3-28 17:28 , Processed in 0.036934 second(s), 13 queries , Gzip On, MemCache On.

Powered by Discuz! X3.5 Licensed

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表