ansoft maxwell 14 最终版 + patch

TBE_Legend · 发表于 2010-12-31 09:35:32

http://hotfile.com/dl/93062211/053cb4e/Maxwell140Win.zip.html

TBE_Legend · 发表于 2010-12-31 11:52:17

一些有用的新功能：

In 2D and 3D transient you can now calculate inductance of windings vs. time. This calculation is not done by default. To turn it on go to "Design Settings" and check the box in the "Matrix Computation" tab. When this is checked if you create a Transient Report you will see inductance quantities (L) listed under the Winding category.

In 2D and 3D magnetostatic you can now choose to calculate incremental inductance instead of apparent inductance. Go to "Design Settings" and select the option in the "Matrix Computation" tab.

Functional magnetization direction is now supported in Maxwell 2D. This allows magnetization direction to be function of spatial intrinsic variables (X,Y, etc.). (This was previously only supported in Maxwell 3D.)

In 2D and 3D transient, the nonlinear residual can now be set as a function of Time (or Speed).

Force density vector plots are now possible in Maxwell.

Support has been added in Maxwell3D for temperature dependent nonlinear anisotropic materials.

Force and Torque calculations are now available in 3D electric transient solutions.

In Maxwell 2D you can now calculate magnetization of a nonlinear material and use this material in a linked design. Look under "Excitations" for the controls to "Set Magnetization Computation..." This applies to magnetostatic and transient designs.

The algorithm for calculating demagnetization operating points in Maxwell2D has been improved and now matches 3D.

A ruler showing the scale of the current view is now (optionally) displayed in modeler windows.

Polyline with cross section now supports trapezoid cross section.

You can now create an Object Coordinate System in the modeler.

There is a new command to "Move CS to End" that can operate on commands in an object's history that CreateObjectCS or CreateFaceCS. This is used to move the creation of the coordinate system to the end of the object's history so that it is created in the final position. It is useful if you have moved or edited an object after you created a CS.

luomu · 发表于 2010-12-31 16:11:42

本帖最后由 luomu 于 2010-12-31 16:16 编辑

好东西啊，顶，谢谢！期待ANSYS14的完整版~

yuncee · 发表于 2011-1-2 13:23:39

好东西啊，顶，谢谢！

zj10158 · 发表于 2011-1-2 21:10:28

谢谢楼主，先看下

hujinyao1988 · 发表于 2011-1-3 12:05:10

下载下来了，不错，能用！

angelhellfallen · 发表于 2011-1-3 22:27:11

多谢楼主，正在下载。
另外有一个不情之请：楼主能不能提供modeFRONTIER4.0的license文件，如果可以的话，最好将 /lic文件夹打包发给我。我寻找了好久，在楼主的一篇帖子里知道你也在用，所以厚着脸皮来求了。感激不尽！
邮箱留下：angelhellfallen@gmail.com

zslzsl · 发表于 2011-1-4 10:08:27

谢谢楼主，好东西啊!

luomu · 发表于 2011-1-4 10:29:45

谁下好了，给传个，yiren_518@163.com，十分感谢~

csmmn3 · 发表于 2011-1-4 17:48:21

是否有安装方法？

csmmn3 · 发表于 2011-1-6 10:55:41

楼主，下载后安装不能用，是否能有问题？或安装有问题？请告诉安装方法。谢谢！

foundry20101111 · 发表于 2011-1-7 15:44:07

:@:@:@片子

tang76 · 发表于 2011-1-7 21:13:08

非常感谢！

02k121 · 发表于 2011-1-8 13:05:19

lijo的作品.

hujinyao1988 · 发表于 2011-1-8 16:57:49

12# foundry20101111
兄弟，淡定啊！这个是可以下载下来的，上西莫论坛看看吧！

achimao · 发表于 2011-2-7 20:33:38

相当期待啊

anonymouss · 发表于 2011-2-17 15:26:12

已经被删除了，不能下载了……

重新发一下吧

icst_li · 发表于 2011-2-19 22:49:50

确实删掉了，谁能给可用的链接啊？

kfxue · 发表于 2011-2-27 18:14:03

试试能下吗

熔雨 · 发表于 2011-3-8 20:49:00

6# hujinyao1988

能说说是怎么下载的吗？我怎么不行呢

账号		自动登录	找回密码
密码			注册

账号		自动登录	找回密码
密码			立即注册

[其它] ansoft maxwell 14 最终版 + patch

本帖子中包含更多资源