找回密码
 注册
Simdroid-非首页
查看: 45924|回复: 263

[资料分享] 版内经典教程及已解决问题分类汇总(更新于2012/3/18)

[复制链接]
发表于 2011-5-22 21:29:58 | 显示全部楼层 |阅读模式 来自 清华大学
本帖最后由 拉布索思 于 2015-1-17 13:37 编辑

版内经典教程及已解决问题分类汇总


非常抱歉,由于论坛更新后以前的很多链接都失效,建议大家使用搜索功能来搜索相应主题。谢谢!


    此贴对workbench版的经典教程及已解决的经典问题作了个简单的分类,供大家参考。点击目录链接会在新窗口打开此楼内容。20#内容主要是供初学者参考的,是关于workbench界面操作的常见问题,放在20#是因为方便大家直接把滚动条拖到最底来查看。分类以workbench的主要模块为基础,汇总得比较粗,有很多东西可能没涉及到,内容不够全面。由于没时间对帖子一一验证,不确定分类是否准确。希望各位踊跃提出此贴的修改建议(如,提供未提及链接,应该如何分类,什么链接错误,分类错误,排版应如何修改,应该删除哪些链接等),有效回帖(提供有参考价值的信息)均能获1030仿真币,感谢支持!

每次更新内容在19#

感谢版友“云少侠”的帮助,已添加每个帖的发布日期,以便版友们更好地参考。同时,云少侠提供了《版内经典教程及已解决问题分类汇总》的word文档,版友们可在1#下载,内容更新于2012/3/18。




目录


2#        几何模型                              

3#        网格划分                              

4#        前处理           

5#        后处理              

6#        静力学分析                        

7#        模态分析                              

8#         瞬态分析           

9#        谐响应、随机振动、响应谱        

10#       显式动力学                          

11#       优化设计        

12#       流体分析                        

13#       流固耦合                                 

14#       电磁、热分析                        

15#       apdl连接                          

16#       其它分析                                            

17#       其它相关                        

18#       练习题


19#       更新内容


20#       常见操作性问题

              






参考文献:

[归类把本版上几大高手的AWE教程作个简单的归纳,方便大家学习

http://forum.simwe.com/thread-847787-1-1.html




p.s.本页面已均被我占用,如需要查找相关经典内容,可按"Ctrl + F",然后输入关键词(如“复合材料”)以查找你想要查询的(在主目录没有独立分类的)内容。为方便查找,在部分标题后添加绿色字体,用以描述此贴关键内容,希望大家补充,谢谢!






本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?注册

×

评分

3

查看全部评分

 楼主| 发表于 2011-5-22 21:33:15 | 显示全部楼层 来自 清华大学
Simdroid开发平台
本帖最后由 拉布索思 于 2012-3-18 14:34 编辑

常见操作性问题


如何上传模型和图片动画 2011-5-26
http://forum.simwe.com/thread-986603-1-1.html
win7下截图及保存动画失败  2011-5-11  (出现关于aero的错误)
http://forum.simwe.com/viewthread.php?tid=983760&page=1#pid2410299
workbench12.0里面的图片怎么保存 2011-4-15
http://forum.simwe.com/viewthread.php?tid=979133&page=1#pid2378104
workbench 云图怎么直接导入WORD2011-4-22
http://forum.simwe.com/viewthread.php?tid=980685&page=1#pid2390080
请教named selection的含义 2011-5-24
http://forum.simwe.com/thread-986271-1-1.html
workbench
怎么查看梁单元应力 2011-5-25
http://forum.simwe.com/thread-986399-1-1.html
如何打开beta选项  2011-5-20  (暂发现V13.0打开beta选项后新增的主要功能有:coupling、扭簧、谐响应可用joint等)
http://forum.simwe.com/viewthread.php?tid=985612&page=1#pid2423066
如何改变ANSYS网格分割线的颜色  2010-8-17
http://forum.simwe.com/viewthread.php?tid=945317
workbench12添加材料方法,给初学者看   2010-4-22 V13也基本适用)
http://forum.simwe.com/viewthread.php?tid=928081
WB12.1添加工程材料及修改方式补充 2011-6-3
http://forum.simwe.com/viewthread.php?tid=988058
workbench中划分网格后,如何查单元的个数和节点的个数  2011-6-1  (查看网格质量)
http://forum.simwe.com/viewthread.php?tid=987652
如何在bench后处理中设定显示最大应力 最小应力   2011-4-29   capped isosurface、修改云图标尺)
http://forum.simwe.com/viewthread.php?tid=981754
输出指定范围内应力的问题       2011-4-29     (修改云图颜色、标尺)
http://forum.simwe.com/viewthread.php?tid=981827
preview surface meshgenerate mesh间是什么关系  2011-6-6    (预览表面网格、生成真正的体网格)   
http://forum.simwe.com/thread-988287-1-1.html
怎么查看最大应力的具体坐标  2010-10-20    (使用命令)
http://forum.simwe.com/viewthread.php?tid=954706
WB 如何获取 最大应力点处的坐标值   2010-1-18     
http://forum.simwe.com/viewthread.php?tid=916366
怎样在workbench中对直接导入的catia装配体修改简化 2011-5-23   (在DM里删除体)
http://forum.simwe.com/viewthread.php?tid=986046
对勾加一斜线是什么意思   2011-5-16     (半对号、表示已划分网格)
http://forum.simwe.com/redirect.php?goto=findpost&ptid=984786&pid=2417355
启动AWB后出现很多Message,点击后链接到网站,这是怎么了?    2011-6-3  news、会议信息)
http://forum.simwe.com/thread-987939-1-1.html
WB做对称分析后,怎么样显示完整的模型了?  2011-6-10    (图形扩展显示、循环对称)
http://forum.simwe.com/thread-988914-1-1.html
dm导入ds的错误    2011-6-11      (进入DS只有体solid,没有壳surface
http://forum.simwe.com/thread-989066-1-1.html
如何合并线    2011-6-13       (合并面、DMmerge
http://forum.simwe.com/thread-989293-1-1.html
excel复制大量数据到tabular data的加载问题  2011-6-7        (每次只能复制3行)
http://forum.simwe.com/thread-988461-1-1.html
请问workbench中如何保存结果     2011-6-15      (查看结果、模型等文件)
http://forum.simwe.com/thread-989705-1-1.html
总体坐标系怎么变成V W X       2011-6-28       (显卡驱动)
http://forum.simwe.com/thread-991440-1-1.html
workbench怎么选择依附一个体上的所有的面 2011-7-1    (先suppress其它体再select all
http://forum.simwe.com/thread-991873-1-2.html
各位,请问为什么没有了Update form CAD选项呢?搞不懂! 2011-7-1          (保持关联性)
http://forum.simwe.com/thread-991864-1-1.html
wb中五种布尔运算的注解,给初学者看    2011-7-2     boolean
http://forum.simwe.com/thread-992039-1-1.html
求助 DesignModeler 中的包围体问题   2011-7-3         enclosurebunding box
http://forum.simwe.com/thread-992228-1-1.html
AWB中的单元类型问题   2011-7-2        (插入command修改单元类型)
http://forum.simwe.com/thread-992042-1-1.html
workbech 中去掉probe的标注   2011-7-4        123probelabel
http://forum.simwe.com/thread-992327-1-1.html
workbench中,一个分析做完了,带网格的模型可以导入下一个分析吗 2011-6-14
http://forum.simwe.com/viewthread.php?tid=989522
求助!怎么去掉分析结果图片上的时间,不想让别人知道我分析的时间? 2011-7-12    Date and Time
http://forum.simwe.com/thread-993494-1-1.html
关于WB中自带材料库的使用        2011-7-13        (材料误删如何找回)
http://forum.simwe.com/thread-993636-1-2.html
一个过约束的warning one or more mpc 2009-7-2
http://forum.simwe.com/viewthread.php?tid=887265
workbench中自动扫描接触怎样设置     2011-7-20       tolerance
http://forum.simwe.com/thread-994670-1-1.html
workbench导入几何体时出现thickness变黄    2011-7-22   (零件有?号)
http://forum.simwe.com/thread-994965-1-1.html
前处理:接触面与目标面的设置     2011-6-13    contact surfacetarget surface
http://forum.simwe.com/viewthread.php?tid=989334
荷载步很多的情况下如何设置子步     2011-7-29       step controlssubsteps
http://forum.simwe.com/thread-995978-1-1.html
如何使一个零件下的所有body更方便的修改颜色叼?2011-7-26
http://forum.simwe.com/viewthread.php?tid=995405
如何解决substeps不能超过1000的限制? 2011-8-5          /CONFIG,NRES
http://forum.simwe.com/viewthread.php?tid=996914
回复 1 不支持 0

使用道具 举报

 楼主| 发表于 2011-5-22 21:30:44 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 13:05 编辑

前处理


[如是我闻]V12之施加随坐标变换的荷载 2009-9-22
http://forum.simwe.com/thread-898111-1-1.html
[
如是我闻壳与实体的连接 2008-3-8
http://forum.simwe.com/thread-820982-1-1.html
[原创学习心得(一)接触中adjust to touchadd offset. Offset = 0的区别 2008-5-19
http://forum.simwe.com/thread-832878-1-15.html
[原创学习心得(三)在WB中简单的模拟弹簧 2008-6-2
http://forum.simwe.com/thread-835443-1-15.html
[原创学习心得(五)利用DM划分功能加载区域载荷 2008-6-17
http://forum.simwe.com/thread-837407-1-14.html
WorkBench 接触分析变形教程<简单易学><图文并茂> 2007-8-10
http://forum.simwe.com/thread-792489-1-3.html
[做题拿分接触分析 2008-4-9
http://forum.simwe.com/viewthread.php?tid=826309
关于Spot Weld的使用方法【图解】2010-6-8
http://forum.simwe.com/thread-936621-1-2.html
原创:beam单元与壳单元连接 2010-3-23
http://forum.simwe.com/viewthread.php?tid=922936
(原创)多载荷步实例分享 2010-5-24
http://forum.simwe.com/viewthread.php?tid=934074
梁与壳的装配-梁的端点vs 2010-6-14
http://forum.simwe.com/viewthread.php?tid=937464
(原创)WB之参数的使用与管理 2010-5-25
http://forum.simwe.com/viewthread.php?tid=934148
AWBromote point的使用 2009-12-4
http://forum.simwe.com/viewthread.php?tid=909402
用例子介绍elastic support的使用 2009-8-18
http://forum.simwe.com/viewthread.php?tid=893069
【思雨凝风】讨论displacementfixedremote的区别  2011-5-18    (包括大量关于应力集中、应力奇异的探讨)
http://forum.simwe.com/thread-985264-1-2.html
【拉布索思】接触中bondedno separation的区别 2011-5-4    (接触)
http://forum.simwe.com/thread-982351-1-5.html
【拉布索思】施加同时随三向坐标和时间变化的载荷(利用awb13中的external data 2011-6-18pressuredisplacement,表格)
http://forum.simwe.com/thread-990079-1-1.html
过盈配合例子一枚 2011-4-19     (接触)
http://forum.simwe.com/viewthread.php?tid=980045
为活跃论坛,出个题目(过盈配合方面的,回答全部正确者我转100仿真币鼓励!)   2009-7-14   (接触)
http://forum.simwe.com/viewthread.php?tid=888854
过盈装配过程分析不收敛----模型文件已重新上传 2011-5-31(接触)
http://forum.simwe.com/viewthread.php?tid=987400
两条边如何设置成同位移,同变形呢   2011-5-20   remote pointcoupling,刚体与弹性体接触)
http://forum.simwe.com/viewthread.php?tid=985612
解决多体零件应力不连续的一种方法 2011-7-21
http://forum.simwe.com/thread-994734-1-5.html
解决多体零件应力不连续问题的终极解决方案~   2011-8-9          FEModeler
http://forum.simwe.com/thread-997206-1-1.html
Remote Boundary Conditions在实际工程中的应用(一):Remote Displacement 2011-7-23
http://forum.simwe.com/thread-995049-1-3.html
Remote Boundary Conditions在实际工程中的应用(二):Remote Force 2011-7-23
http://forum.simwe.com/thread-995052-1-4.html
Remote Boundary Conditions在实际工程中的应用(三):Point Mass 2011-7-25
http://forum.simwe.com/thread-995259-1-3.html
Point Mass定义中相关参数解释~ 2011-9-8
http://forum.simwe.com/thread-1002917-1-1.html
Workbench中实现复杂函数加载的方法~  2011-9-13            (二元函数的面荷载)
http://forum.simwe.com/thread-1003285-1-1.html
【拉布索思】谐响应中阻尼的设置及其工程应用 2011-12-19
http://forum.simwe.com/thread-1017756-1-1.html
回复 1 不支持 0

使用道具 举报

 楼主| 发表于 2011-5-22 21:30:19 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 12:39 编辑

几何模型



[
如是我闻在Workbench实现圆周对称 2008-6-9

http://forum.simwe.com/thread-836391-1-6.html
AWE11周期对称结构分析 2009-12-3
http://forum.simwe.com/viewthread.php?tid=909235
ANSYS 13.0 Workbench循环对称分析功能的革新 2011-3-22
http://forum.simwe.com/viewthread.php?tid=974880
[如是我闻对有几何缺陷模型的分析 2008-6-17
http://forum.simwe.com/thread-837376-1-14.html
[原创]AWE推广(二)_Workbench中实现梁截面的任意偏置 2006-8-24
http://forum.simwe.com/thread-739563-1-39.html
[原创]AWE推广(四)_ AWE中如何实现对称简化分析 2006-11-9
http://forum.simwe.com/thread-750618-1-7.html
[原创壳单元在AWB中的应用 2008-7-8
http://forum.simwe.com/thread-839965-1-12.html
DesignModeler之割面初体验 2008-10-21
http://forum.simwe.com/thread-851632-1-2.html
关于DesignModeler的一些心得 2010-4-3
http://forum.simwe.com/viewthread.php?tid=924679
(原创)DM中模型的简化 2010-7-10
http://forum.simwe.com/viewthread.php?tid=940493
在DesignModeler中进行大批量Slice实体的方法~ 2011-7-15
http://forum.simwe.com/thread-993857-1-1.html
DM中批量imprint faces 2011-9-22
http://forum.simwe.com/thread-1004779-1-1.html
Slice Off Faces + Slice Off Edges 2011-8-26
http://forum.simwe.com/thread-999540-1-1.html
DesignModeler中螺纹建模过程贴图~~~ 2011-9-22
http://forum.simwe.com/thread-1004763-1-1.html
SpaceClaim中对模型参数化并与Workbench双向刷新~ 2011-10-24
http://forum.simwe.com/thread-1009189-1-1.html

评分

1

查看全部评分

回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:30:23 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 13:05 编辑

网格划分


一个复杂齿轮的全六面体网格剖分(Workbench2011-7-2
http://forum.simwe.com/thread-992055-1-1.html
[如是我闻]V12Multizone 2009-9-21
http://forum.simwe.com/thread-897931-1-1.html
[
原创]AWE推广(五)_ 判断网格质量的方法Convergence 2007-5-22
http://forum.simwe.com/thread-779920-1-6.html
[原创学习心得(四)机轴网格划分 2008-6-5
http://forum.simwe.com/thread-836051-1-15.html
WorkBench ICEM CFD 网格划分入门<简单易学><图文并茂> 2008-6-24
http://forum.simwe.com/thread-838290-1-4.html
WorkBench CFD 教程<简单易学><图文并茂> 2007-8-26
http://forum.simwe.com/thread-794828-1-1.html
WorkBench ICEM CFD Ansys CFX<简单易学><图文并茂> 2008-6-26
http://forum.simwe.com/thread-838598-1-2.html
[挑战赛网格系列一:球体网格的划分 2008-8-27
http://forum.simwe.com/viewthread.php?tid=844957
[原创]AWB-ICEM 曲轴六面体结构网格化分 2008-11-17
http://forum.simwe.com/thread-855384-1-1.html
请问这个模型,怎么用wb做成规则六面体网格? 2008-11-26
http://forum.simwe.com/thread-856767-1-1.html
[介绍在workbench里剖分划网格 2008-6-7
http://forum.simwe.com/thread-836290-1-2.html
电动车车架的网格划分 2010-3-27
http://forum.simwe.com/thread-923526-1-1.html
[原创图文并茂详解如何在ANSYS 12 Workbench中导入ICEM网格进行分析 2009-7-7
http://forum.simwe.com/viewthread.php?tid=887940
原创 另类方法将ICEM网格导入 WB 屡试不爽 2009-7-8
http://forum.simwe.com/viewthread.php?tid=888100
网格划分虚拓扑的应用简介 2009-11-25
http://forum.simwe.com/thread-907967-1-1.html
我的笔记:Local Mesh Control 2010-1-16
http://forum.simwe.com/thread-916130-1-1.html
LS-PrePost中对网格模型进行变形的方法~ 2011-5-31
http://forum.simwe.com/viewthread.php?tid=987396
Mapped Face Meshing~~~ 2011-9-26
http://forum.simwe.com/thread-1005359-1-1.html
Proe中分割实体,Mesh中分网~~~ 2011-9-16
http://forum.simwe.com/thread-1003926-1-1.html
三棱锥和圆锥体的网格划分(ICEM CFD2011-9-23
http://forum.simwe.com/thread-1004982-1-1.html
FE Modeler中装配来源不同的网格模型的方法~ 2011-8-30
http://forum.simwe.com/thread-1001382-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:30:55 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:19 编辑

后处理


[如是我闻在Workbench实现子模型分析 2008-6-17
http://forum.simwe.com/thread-837421-1-1.html
[如是我闻在Simulation中直接给出Classic Postprocessing结果图 2007-5-29
http://forum.simwe.com/thread-781274-1-38.html
[如是我闻根据结果更新模型 2010-3-23      (包括利用有限元模型建立几何模型)
http://forum.simwe.com/thread-922996-1-1.html
[如是我闻在Workbench里进行路径操作 2007-12-3
http://forum.simwe.com/thread-810105-1-1.html
DS中查看任意一点的结果随时间变化的曲线 2007-12-3
http://forum.simwe.com/viewthread.php?tid=931737
Mechanical中获取最大结果值节点坐标和编号的方法~ 2011-8-6
http://forum.simwe.com/viewthread.php?tid=996929
[原创]AWE推广()_使用AWERST文件进行后处理 2008-5-25
http://forum.simwe.com/thread-834086-1-2.html
[求助并讨论]WB分析的结果可靠吗?2008-8-13
http://forum.simwe.com/thread-843708-1-7.html
Workbench中实现Shell-Solid子模型分析 2009-12-27
http://forum.simwe.com/thread-913048-1-3.html
子模型分析在实际工程中的应用 2011-7-28
http://forum.simwe.com/thread-995854-1-3.html
Workbench里进行路径操作(不使用Command2010-3-29
http://forum.simwe.com/viewthread.php?tid=923741
请点评,在solution中插入代码读所有节点在每个子步的温度值 2011-3-4
http://forum.simwe.com/viewthread.php?tid=971791
ANSYS Workbench 12 中对有限元模型和结果图形扩展显示  2011-4-14      (循环对称)
http://forum.simwe.com/viewthread.php?tid=978920
【拉布索思】模型变形后的质心坐标  2011-4-28    (包括利用有限元模型建立几何模型)
http://forum.simwe.com/thread-981741-1-1.html
获取有限元模型上任意位置处最靠近的节点编号的方法~ 2011-8-29
http://forum.simwe.com/thread-1001258-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:31:13 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:20 编辑

静力学分析



[原创三级圆锥-圆柱齿轮减速箱的静力学分析 2006-4-19
http://forum.simwe.com/thread-722320-1-18.html
[原创学习心得(二)模拟螺母旋入引起的其他零件变形 2008-5-21
http://forum.simwe.com/thread-833428-1-17.html
WorkBench 扣紧件仿真<简单易学><图文并茂> 2007-8-14
http://forum.simwe.com/thread-793004-1-30.html
原创:幕墙分析 2010-3-9
http://forum.simwe.com/viewthread.php?tid=920966
焊接静力分析 2010-7-4
http://forum.simwe.com/viewthread.php?tid=939761
点焊焊接分析 2010-8-5
http://forum.simwe.com/viewthread.php?tid=943812
【原创】脚凳工作状态静强度分析 2009-8-21
http://forum.simwe.com/viewthread.php?tid=893444
[原创]Workbench实现轴对称模型分析 2009-1-5
http://forum.simwe.com/viewthread.php?tid=861743
[原创螺栓连接计算 2008-12-19
http://forum.simwe.com/viewthread.php?tid=859771
【原创】WorkBench 9.0实例分析应用教程(1):静力分析 2005-1-6
http://forum.simwe.com/viewthread.php?tid=393183
行星减速器 静力学分析 2010-4-25
http://forum.simwe.com/viewthread.php?tid=928733
悬垂绳索的模拟(抛砖引玉贴)~ 2011-8-20
http://forum.simwe.com/thread-998825-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:31:23 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:21 编辑

模态分析



模态分析在结构设计中的运用体会及讨论 2009-4-5
http://forum.simwe.com/thread-872644-1-3.html
原创:workbench中实现周期对称结构的模态分析 2010-7-31
http://forum.simwe.com/viewthread.php?tid=943201
workbench12.0模态与屈曲分析 2010-4-16
http://forum.simwe.com/viewthread.php?tid=927006
有预紧力的模态分析例子 2010-1-12
http://forum.simwe.com/viewthread.php?tid=915469
Pre-stressed Modal预应力模态分析, AWB12.0 2009-7-18
http://forum.simwe.com/thread-889448-1-1.html
ansys workbench 中文教程003--第五章_模态分析 2007-9-11
http://forum.simwe.com/thread-797483-1-1.html
装配体的模态分析,急!2011-4-6
http://forum.simwe.com/viewthread.php?tid=977478
请问如何理解模态的阶数?2011-4-13
http://forum.simwe.com/viewthread.php?tid=978823
【拉布索思】一个类蜗轮蜗杆的模态分析和瞬态分析  2011-6-2     (装配体模态分析,转动,joint load
http://forum.simwe.com/thread-987805-1-1.html
一根浸没在水中钢柱的模态分析(Workbench 2011-8-29       (湿模态)
http://forum.simwe.com/thread-1001206-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:31:32 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:22 编辑

瞬态分析


[如是我闻显卡跌落分析 2008-2-24
http://forum.simwe.com/thread-819225-1-2.html
一个旋转偏心的多体动力学分析 2009-8-7
http://forum.simwe.com/thread-891881-1-1.html
圆轴圆周旋转 2009-12-15
http://forum.simwe.com/thread-911287-1-1.html
[教程一个AWB11多柔体动力学的官方教程,论坛这方面资料比较少,希望大家多多共享 2008-5-6
http://forum.simwe.com/thread-830474-1-1.html
发一个柔体曲柄机构的多体动力学仿真,算了1个小时的成果呀!!!2008-7-29
http://forum.simwe.com/thread-842166-1-1.html
发一个四连杆机构柔体多体动力学的结果文件 2008-7-22
http://forum.simwe.com/thread-841538-1-1.html
怎么回事:约束模态分析和有预应力模态分析结果竟然一样 2009-12-16
http://forum.simwe.com/thread-911521-1-1.html
薄环片热、瞬态分析(提前祝大家,新年快乐!)2008-1-24
http://forum.simwe.com/thread-817408-1-1.html
关于多体动力学仿真的几个问题的讨论 2009-5-20
http://forum.simwe.com/viewthread.php?tid=881007
workbench进行瞬态动力学分析 2010-11-12
http://forum.simwe.com/viewthread.php?tid=958363
连接器端子插拔仿真 2010-8-11
http://forum.simwe.com/viewthread.php?tid=944448
transient structural simulation of dropping 2010-4-28
http://forum.simwe.com/viewthread.php?tid=929155
多体动力学在ANSYS中的实现~  2011-11-30  jointapdl的处理)
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:31:43 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:23 编辑

谐响应、随机振动、响应谱


AnsysWorkBench11.0振动电机轴谐响应分析 2009-11-23
http://forum.simwe.com/thread-907439-1-1.html
提供随机振动分析教程一个 2009-12-23
http://forum.simwe.com/thread-912422-1-1.html
模态和谐响应接触添加 2010-6-1
http://forum.simwe.com/thread-935495-1-1.html
请教随机振动分析和谱分析的区别?2010-5-9
http://forum.simwe.com/thread-931028-1-1.html
AWE中有没有响应谱分析的模块啊?2008-10-27
http://forum.simwe.com/thread-852526-1-1.html
【拉布索思】转动轴的受力分析及谐响应分析  2011-5-9    (包括刚体动力学)
http://forum.simwe.com/thread-983471-1-3.html
AWB13.0做谐响应分析,如何对施加的不同扭矩载荷设置相位差和不同频率  2011-5-29   (多点激励)
http://forum.simwe.com/viewthread.php?tid=987159
【拉布索思】模拟振动台施加加速度激励的方法 2012-1-14
http://forum.simwe.com/thread-1020571-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:31:51 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:24 编辑

显式动力学



掠水而过的一个水泥块—Explicit Dynamics 2011-7-23
http://forum.simwe.com/thread-995096-1-3.html
【原创】ANSYS workbench联合ANSYS/LS-dyna显示动力学分析 2011-3-23
http://forum.simwe.com/thread-975015-1-1.html
一根方管与钢块的碰撞【简易AUTODYN教程】2010-6-16
http://forum.simwe.com/thread-937630-1-1.html
autodyn 穿甲分析过程简述 2010-7-7
http://forum.simwe.com/thread-940160-1-1.html
高速子弹横穿球壳,为什么不能二次穿透?急!!请教.   2011-7-15
http://forum.simwe.com/thread-993991-1-1.html
AUTODYNSet up the ALE problem in AUTODYN 2010-7-2
http://forum.simwe.com/thread-939591-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:32:00 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:25 编辑

优化设计



[原创在Ansys Workbench环境中对构件的尺寸优化设计 2006-4-15
http://forum.simwe.com/thread-721520-1-8.html
AWE中实现6sigmaDOE优化 2008-9-12
http://forum.simwe.com/thread-846963-1-2.html
几条Strain Life曲线数据和低周疲劳大概流程 2008-8-7
http://forum.simwe.com/thread-843110-1-6.html
利用SolidworksANSYS DesignXplorer对大件的刚性进行优化设计(原创) 2009-2-20
http://forum.simwe.com/thread-865308-1-4.html
AW metamodel优化 2007-6-19
http://forum.simwe.com/viewthread.php?tid=784986
(原创)solidworksworkbench优化参数化全过程 2011-1-12
http://forum.simwe.com/thread-967848-1-1.html
如图,优化分析后得到的候选设计值(candidate designs)为何不是最终的优化结果?2008-12-11
http://forum.simwe.com/thread-858765-1-1.html
AWB 结构优化总结 2009-9-29
http://forum.simwe.com/thread-899150-1-1.html
桥梁优化 2009-12-30
http://forum.simwe.com/thread-913441-1-1.html
DesignXplorerWB中的简单应用 2008-8-4
http://forum.simwe.com/thread-842740-1-1.html
[原创结果随特征尺寸的变化 2009-8-17
http://forum.simwe.com/thread-892942-1-1.html
形状优化后的模型导入到CAD中修改的方法~ 2011-10-11
http://forum.simwe.com/thread-1007139-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:32:08 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:26 编辑

流体分析

WorkBench 流体CFD 运动中的汽车<简单易学><图文并茂> 2008-2-3
http://forum.simwe.com/thread-818179-1-12.html
WorkBench流体CFD简易风力发电机叶轮仿真全过程 2008-10-7
http://forum.simwe.com/thread-849678-1-4.html
螺旋桨敞水特性及单向应力分布计算(原创)2010-1-12
http://forum.simwe.com/thread-915517-1-3.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:32:16 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:27 编辑

流固耦合



AnsysWB 固液耦合分析<简单易学><图文并茂> 2008-7-1
http://forum.simwe.com/thread-839161-1-2.html
一个缸体的流固耦合分析!2008-7-10
http://forum.simwe.com/thread-840088-1-12.html
Re200 2d圆柱绕流 流固耦合振动分析 2010-2-10
http://forum.simwe.com/viewthread.php?tid=919209
基于Ansys12.0Workbench血管流固耦合之最详尽小火车之旅 2009-12-14
http://forum.simwe.com/viewthread.php?tid=911031
叶片的流固耦合分析 2010-9-10
http://forum.simwe.com/viewthread.php?tid=948700
AWB12&13流固耦合教程与心得 2011-4-22
http://forum.simwe.com/viewthread.php?tid=980572
fluentworkbench实现一个燃烧器的流固耦合 2010-7-27
http://forum.simwe.com/thread-942682-1-1.html
昨天写的CFX流固耦合的文档 2010-6-5
http://forum.simwe.com/thread-936052-1-1.html
Ansys Workbench最为详尽的血管流固耦合PDF 2009-12-12
http://forum.simwe.com/thread-910787-1-1.html
CFX->ANSYS Classic 单向流固耦合算例 2010-12-15
http://forum.simwe.com/viewthread.php?tid=963667
ANSYS V13 WB作周期性对称件的单方向流固耦合例 2011-4-28
http://forum.simwe.com/viewthread.php?tid=981623
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:32:26 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:27 编辑

电磁、热分析



[原创]AWE推广(三)_ 热应力分析 2006-10-13
http://forum.simwe.com/viewthread.php?tid=746430
Workbench环境中的摩擦生热模拟(热结构直接耦合)2011-1-12
http://forum.simwe.com/viewthread.php?tid=967856
workbench摩擦生热实例 2010-7-30
http://forum.simwe.com/viewthread.php?tid=943087
原创例子,热形变分析 2010-4-7
http://forum.simwe.com/thread-925336-1-1.html
关于热结构耦合的计算 2009-4-21
http://forum.simwe.com/thread-875764-1-1.html
WB12中流--固分析(原创)2009-5-18
http://forum.simwe.com/thread-880529-1-1.html
【原创】关于热应力分析的总结 2009-4-10
http://forum.simwe.com/thread-873621-1-1.html
电磁场分析的一个例子(详细步骤,WB10.02008-10-18
http://forum.simwe.com/thread-851337-1-1.html
AWE中的散热分析, 2008-11-18
http://forum.simwe.com/thread-855632-1-1.html
AWB电磁铁静态计算 2008-3-24
http://forum.simwe.com/thread-823371-1-1.html
ANSYS WB13静磁场分析(电磁铁电流源)2011-6-2
http://forum.simwe.com/viewthread.php?tid=987859
AWE中的电机例子 2005-8-31
http://forum.simwe.com/thread-571365-1-1.html
ansys workbench 中文教程004--第六章_热分析 2007-9-11
http://forum.simwe.com/thread-797484-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:32:34 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:28 编辑

apdl连接



[如是我闻]APDLWB中的应用(概论) 2007-8-13
http://forum.simwe.com/thread-792737-1-1.html
[如是我闻将模型从Classic导入WB(V11) 2007-5-27
http://forum.simwe.com/thread-780946-1-1.html
[如是我闻将WB的模型导入Classic 2007-5-25
http://forum.simwe.com/thread-780546-1-1.html
ansys APDL实例操作视频教程中子 2011-4-26
http://forum.simwe.com/viewthread.php?tid=981233
workbench划网之后能直接保存成cdb格式?  2011-6-6   (在awb用命令直接保存)
http://forum.simwe.com/viewthread.php?tid=988261
如何将Mechanical中的模型导进Mechanical APDLv12.0,12.1,13.0)?---已解决2011-7-23
http://forum.simwe.com/thread-995116-1-2.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:32:43 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:29 编辑

其它分析



原创,一个旋转偏心的多刚体分析例子 2008-10-18
http://forum.simwe.com/thread-851284-1-1.html
[原创动画关于AWE中的刚体运动学动画(陀螺仪)2009-3-7
http://forum.simwe.com/thread-867519-1-1.html
workbench中刚体和柔性体接触,接触怎么添加?为什么添加都不对呢?2008-10-19
http://forum.simwe.com/thread-851412-1-1.html
发个非线性屈曲分析的视频,非原创 2011-2-13
http://forum.simwe.com/thread-969609-1-1.html
ansys workbench 中文教程005_第七章_线性屈曲分析.pdf 2007-9-11
http://forum.simwe.com/thread-797485-1-1.html
[如是我闻在WB中定义复合材料  2010-11-25      (复合材料)
http://forum.simwe.com/viewthread.php?tid=960379
wb做了一个夹芯复合材料的例子,还有地方有些问题,请高手指教   2010-5-3     (复合材料)
http://forum.simwe.com/viewthread.php?tid=929970
复合材料破坏分析(当个起头希望大家补充)    2011-6-1    (复合材料,包括利用Tsai-Wu准则的后处理)
http://forum.simwe.com/viewthread.php?tid=987676
Workbench的单元生死与时间步关联分析 2010-9-3
http://forum.simwe.com/viewthread.php?tid=947643
【原创】用AWB软件进行弹簧类结构的分析计算 2008-9-10
http://forum.simwe.com/viewthread.php?tid=846784
机构疲劳分析 2008-9-17
http://forum.simwe.com/viewthread.php?tid=847557
橡胶材料超弹性算例(原创)2009-4-10
http://forum.simwe.com/viewthread.php?tid=873605
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:32:52 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:30 编辑

其它相关

[如是我闻除去ANSYS LOGO 2007-8-30
http://forum.simwe.com/thread-795474-1-38.html
[如是我闻]Workbench批处理分析  2009-4-14
http://forum.simwe.com/thread-874395-1-1.html
[如是我闻]V12HELP 2009-10-13
http://forum.simwe.com/thread-900562-1-1.html
[如是我闻]V12之在求解过程中查看已完成的结果 2009-9-17
http://forum.simwe.com/thread-897405-1-1.html
[原创]AWE推广()_AWE v11.0中的远程求解控制 2008-4-19
http://forum.simwe.com/thread-827903-1-3.html
Workbench JScript---快速生成简单报告 2008-3-8
http://forum.simwe.com/thread-820906-1-3.html
Workbench JScript---插入结果集的改进代码和结果集的导出 2008-2-6
http://forum.simwe.com/thread-818262-1-7.html
Ansys Workbench中不大不小的bug 2008-8-7
http://forum.simwe.com/viewthread.php?tid=843089
从事CAE研究工作者的出路与职业规划 2010-7-4
http://forum.simwe.com/thread-939753-1-1.html
V13 EXTERNAL DATA应用 2011-5-7
http://forum.simwe.com/viewthread.php?tid=982934
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:33:11 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:39 编辑

练习题


【练习题一】苹果系列一之DM建模 2011-6-22
http://forum.simwe.com/thread-990571-1-1.html
【练习题二】苹果系列二之划分网格 2011-6-29
http://forum.simwe.com/thread-991605-1-1.html
【练习题三】苹果系列三之模态分析 2011-7-6
http://forum.simwe.com/thread-992609-1-1.html
【练习题四】苹果系列四之牛顿发现重力 2011-7-13
http://forum.simwe.com/thread-993574-1-1.html
【练习题五】打水漂 2011-7-27
http://forum.simwe.com/thread-995663-1-1.html
【练习题六】平板上运动 2011-8-3
http://forum.simwe.com/thread-996590-1-1.html
【练习题七】workbench网格划分 2011-8-10
http://forum.simwe.com/thread-997416-1-1.html
【练习题八】带孔薄板两端承受均布载荷 2011-8-17
http://forum.simwe.com/thread-998397-1-1.html
【练习题九】卡头压进卡座的力学过程分析 2011-8-24
http://forum.simwe.com/thread-999267-1-2.html
【练习题十】膜结构分析 2011-9-9
http://forum.simwe.com/thread-1002944-1-1.html
【练习题十一】金属圆盘弹塑性分析 2011-9-24
http://forum.simwe.com/thread-1005002-1-1.html
回复 不支持

使用道具 举报

 楼主| 发表于 2011-5-22 21:33:13 | 显示全部楼层 来自 清华大学
本帖最后由 拉布索思 于 2012-3-18 14:40 编辑

更新内容


听取67#版友的意见,此楼用作显示每次更新内容,以免内容过多,此楼内容上限为5次更新。


2011-8-24
5#
Mechanical中获取最大结果值节点坐标和编号的方法~
http://forum.simwe.com/viewthread.php?tid=996929
18#
【练习题九】卡头压进卡座的力学过程分析
http://forum.simwe.com/thread-999267-1-2.html

2011-12-2
2#
在DesignModeler中进行大批量Slice实体的方法~
http://forum.simwe.com/thread-993857-1-1.html
DM中批量imprint faces
http://forum.simwe.com/thread-1004779-1-1.html
Slice Off Faces + Slice Off Edges
http://forum.simwe.com/thread-999540-1-1.html
在DesignModeler中螺纹建模过程贴图~~~
http://forum.simwe.com/thread-1004763-1-1.html
SpaceClaim中对模型参数化并与Workbench双向刷新~
http://forum.simwe.com/thread-1009189-1-1.html
3#
Mapped Face Meshing~~~
http://forum.simwe.com/thread-1005359-1-1.html
在Proe中分割实体,Mesh中分网~~~
http://forum.simwe.com/thread-1003926-1-1.html
三棱锥和圆锥体的网格划分(ICEM CFD)
http://forum.simwe.com/thread-1004982-1-1.html
在FE Modeler中装配来源不同的网格模型的方法~
http://forum.simwe.com/thread-1001382-1-1.html
4#
Point Mass定义中相关参数解释~
http://forum.simwe.com/thread-1002917-1-1.html
在Workbench中实现复杂函数加载的方法~
http://forum.simwe.com/thread-1003285-1-1.html
解决多体零件应力不连续问题的终极解决方案~
http://forum.simwe.com/thread-997206-1-1.html
5#
获取有限元模型上任意位置处最靠近的节点编号的方法~
http://forum.simwe.com/thread-1001258-1-1.html
6#
悬垂绳索的模拟(抛砖引玉贴)~
http://forum.simwe.com/thread-998825-1-1.html
7#
一根浸没在水中钢柱的模态分析(Workbench)
http://forum.simwe.com/thread-1001206-1-1.html
8#
多体动力学在ANSYS中的实现~
http://forum.simwe.com/thread-1015098-1-1.html
11#
形状优化后的模型导入到CAD中修改的方法~
http://forum.simwe.com/thread-1007139-1-1.html
18#
【练习题十】膜结构分析
http://forum.simwe.com/thread-1002944-1-1.html
【练习题十一】金属圆盘弹塑性分析
http://forum.simwe.com/thread-1005002-1-1.html

2012-2-26
4#
【拉布索思】谐响应中阻尼的设置及其工程应用
http://forum.simwe.com/thread-1017756-1-1.html
9#
【拉布索思】模拟振动台施加加速度激励的方法
http://forum.simwe.com/thread-1020571-1-1.html

2012-3-18
增加帖子发布日期
回复 不支持

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|小黑屋|联系我们|仿真互动网 ( 京ICP备15048925号-7 )

GMT+8, 2024-3-29 05:19 , Processed in 0.061556 second(s), 12 queries , Gzip On, MemCache On.

Powered by Discuz! X3.5 Licensed

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表