UG NX6.0的*.prt文件导入hypermesh10.0的问题

huyang940 · 发表于 2011-6-8 15:06:32

在把UG NX6.0的*.prt文件导入hypermesh10.0时，hypermesh10.0中出现如下消息："UG Shared Library not loaded"
请问这个怎么解决？先谢谢哪位大哥大姐帮忙了...

xiaopiujy · 发表于 2011-6-8 19:32:56

转成igs格式导入试试！

fengcy · 发表于 2011-6-8 22:28:01

我一般是导出为 x_t格式再倒入hm 没有出过问题

JeffreyShi · 发表于 2011-6-9 07:40:06

You need to create these environmentvariables and point to their respective directories.
Please refer to the example shownbelow.

WINDOWS

UGII_BASE_DIR	This environment variable must point to the UG installation directory.
UGII_ROOT_DIR	This environment variable must point to the UG installation UGII directory.
PATH	This environment variable must include the UGII_ROOT_DIR directory.
UGS_LICENSE_SERVER	This environment variable must point to the UG license server1.

Example: UG installation located at C:\Program Files\UGS\NX 6.0
UGII_BASE_DIR: C:\Program Files\UGS\NX 6.0
UGII_ROOT_DIR: %UGII_BASE_DIR%\UGII\
PATH: %UGII_BASE_DIR%\UGII\
UGS_LICENSE_SERVER: 28000@licsrv

JeffreyShi · 发表于 2011-6-9 07:41:31

You need to create these environmentvariables and point to their respective directories.
Please refer to the example shownbelow.

WINDOWS

UGII_BASE_DIR	This environment variable must point to the UG installation directory2.
UGII_ROOT_DIR	This environment variable must point to the UG installation UGII directory2.
PATH	This environment variable must include the UGII_ROOT_DIR directory.
UGS_LICENSE_SERVER	This environment variable must point to the UG license server1.

Example: UG installation located at C:\Program Files\UGS\NX 6.0
UGII_BASE_DIR: C:\Program Files\UGS\NX 6.0
UGII_ROOT_DIR: %UGII_BASE_DIR%\UGII\
PATH: %UGII_BASE_DIR%\UGII\
UGS_LICENSE_SERVER: 28000@licsrv

兔子19870630 · 发表于 2012-6-26 19:50:14

很多问题，需解决呀

账号		自动登录	找回密码
密码			注册

账号		自动登录	找回密码
密码			立即注册

[软件接口] UG NX6.0的*.prt文件导入hypermesh10.0的问题