Simwe仿真论坛(forum.simwe.com),CAE/CAD/CAM/,FEA/FEM/有限元分析论坛---(手机验证注册)'s Archiver
论坛
›
D01:HyperMesh&HyperView--前后处理技术
› 如何在HM 10.0 的 ANSYS 模板中定义MPC184单元
wendell_yan
发表于 2012-10-18 10:51:57
如何在HM 10.0 的 ANSYS 模板中定义MPC184单元
有高手帮忙解决的吗?导入ansys出错:Specified forces from the previous F command were applied only to the
selected NODAL LOAD set.
fenghe1001
发表于 2012-11-13 14:36:20
如何在HM 9.0 的 ANSYS 模板中定义MPC184单元
http://forum.simwe.com/thread-874817-1-1.html
页:
[1]
查看完整版本:
如何在HM 10.0 的 ANSYS 模板中定义MPC184单元