计算问题
用OptiStruct计算后出现这种问题:ERROR # 723 FROM SUBROUTINE chkrbe2An invalid rigid element.
This RBE2 is not connected with any structural element.
RBE2 element id = 314
independent grid id = 452
Note: If this rigid element is also connected with other rigid elements,
then this error means that there is rigid body mode or mechanism remained
in this rigid element chain due to lack of connected structural elements.
怎么解决啊 各位朋友们
很清楚啊~~~~~主节点没有连接任何单元
This RBE2 is not connected with any structural element.
RBE2 element id = 314
independent grid id = 452 就像楼上说的那样,因为某个节点处于自由状态,导致你这个结构存在刚体位移,不是个静态结构而是可动机构。
可能是你在建立rbe2的时候忘了连接某个节点,或者是有重复节点。 多谢各位啊 AK64 发表于 2012-11-15 19:38 static/image/common/back.gif
就像楼上说的那样,因为某个节点处于自由状态,导致你这个结构存在刚体位移,不是个静态结构而是可动机构。 ...
可是我该怎么来解决这个问题呢,麻烦你了呀 1检查314号rbe单元,确保节点正确连接。
2看下约束边界条件是否正确施加,边界条件要能够保证结构处于静态。
3合并重复节点。
页:
[1]