Simwe仿真论坛(forum.simwe.com),CAE/CAD/CAM/,FEA/FEM/有限元分析论坛---(手机验证注册)'s Archiver
论坛
›
D01:HyperMesh&HyperView--前后处理技术
› 模态分析 属性 荷载都设置后 点击optisturt出现错误怎么解决
xhenxh
发表于 2014-5-28 20:52:36
模态分析 属性 荷载都设置后 点击optisturt出现错误怎么解决
A fatal error has been detected during input processing:
*** ERROR #23 ***
ID 2 used on Case Control data MPC or MPCADD is missing in bulk data.
andm
发表于 2014-5-29 12:44:57
ID 2 载荷类型错误。
load type=MPC or MPCADD 。
检查一下对不对。
页:
[1]
查看完整版本:
模态分析 属性 荷载都设置后 点击optisturt出现错误怎么解决