13260797386 发表于 2014-10-20 22:33:04

用cweld（GA-GA MLMMID）模拟焊缝，报错

A fatal error has occurred during computations:

*** ERROR #906 ***
Angle between the normals to weld patches is too large (angle = 75.0 degrees).
CWELD element id =       2058

************************************************************************

千里目 发表于 2016-9-27 17:53:59

这种壳单元的是不是得建立CQUAD4 or 3 类型的呢？
页: [1]
查看完整版本: 用cweld（GA-GA MLMMID）模拟焊缝，报错