Simwe仿真论坛(forum.simwe.com),CAE/CAD/CAM/,FEA/FEM/有限元分析论坛---(手机验证注册)'s Archiver
论坛
›
D01:HyperMesh&HyperView--前后处理技术
› 用surface沿曲线建solid
nancywang2006
发表于 2014-11-27 21:57:20
用surface沿曲线建solid
hypermesh中用surface沿曲线建solid,提示: drag lines are not connected
页:
[1]
查看完整版本:
用surface沿曲线建solid