optistruct静力学分析报错
用hypermesh optistruct进行静力分析时报错下面是报错报告************************************************************************
** **
** **
** OptiStruct 12.0 **
** **
** Design and Optimization Software **
** from Altair Engineering, Inc. **
** **
** **
** Windows 7 WorkstationSP1 (Build 7601)HU-PC **
** 2 CPU:AMD A4-3305M APU with Radeon(tm) HD Graphics **
** CPU speed1900 MHz **
** 1752 MB RAM,11206 MB swap **
** **
** Build tag: 0654688_5533120_Ce64RBW8UH12M:77575-0004000000004000**
************************************************************************
**COPYRIGHT (C) 1996-2013 Altair Engineering, Inc.**
** All Rights Reserved.Copyright notice does not imply publication. **
** Contains trade secrets of Altair Engineering, Inc. **
** Decompilation or disassembly of this software strictly prohibited. **
************************************************************************
*** OptiStruct defaults set from:
install config file: C:\Program Files\Altair\12.0\/hwsolvers/hwsolver.cfg.
NOTE # 9199
MSGLMT=BRIEF is active, following messages will be suppressed:
741 742 1935 1052 1305 1436 1437 1051 1931 1932 2010
Use MSGLMT=STRICT (e.g. in config file) to turn back full printing.
*** Problem(s) found while reading line 115474 from file:
C:/Users/hu/Desktop/jisuan/TAJI GONGKUANG 1.fem
"CONTACT 1 SLIDE OPENGAP"
This line was interpreted as:
115474:CONTACT, 1, SLIDE, , , OPENGAP
*** ERROR # 1000 *** in the input data:
Incorrect data in field # 4.
Expected STRING or INTEGER, foundBLANK.
*** ERROR # 1000 *** in the input data:
Incorrect data in field # 5.
Expected STRING or INTEGER, foundBLANK.
************************************************************************
RESOURCE USAGE INFORMATION
--------------------------
MAXIMUM MEMORY USED 3426 MB
MAXIMUM DISK SPACE USED 1 MB
************************************************************************
************************************************************************
COMPUTE TIME INFORMATION
------------------------
EXECUTION STARTED Fri Oct 20 10:38:49 2017
EXECUTION COMPLETED Fri Oct 20 10:39:59 2017
ELAPSED TIME 00:01:09
CPU TIME 00:01:07
************************************************************************
*** PROGRAM STOPPED: FATAL ERROR(s) ENCOUNTERED.
***** END OF REPORT *****
For Useful OptiStruct Tips and Tricks, go to the URL:
http://www.altairhyperworks.com/tips.aspx
************************************************************************
There were 2 error messages during input processing.
The first message is repeated below:
*** Problem(s) found while reading line 115474 from file:
C:/Users/hu/Desktop/jisuan/TAJI GONGKUANG 1.fem
"CONTACT 1 SLIDE OPENGAP"
*** ERROR # 1000 *** in the input data:
Incorrect data in field # 4.
************************************************************************
大神们求救
主面和从面没有设置 lch4302 发表于 2017-10-20 13:41
主面和从面没有设置
是 面连接的主从没有设置吗？还有怎么设置 麻烦了
页:
[1]