大大可 发表于 2019-2-26 23:09:48

*CONTACT cannot be defined on 2D element facets.

错误提示：*CONTACT cannot be defined on 2D element facets.If the model contains 2D or axisymmetric elements then *CONTACT INCLUSIONS, ALL EXTERIOR cannot be specified, and the first surface name on each data line under *CONTACT INCLUSIONS or *CONTACT EXCLUSIONS must not be blank.这个是哪里出问题了，求大神告知

Demons7 发表于 2019-5-25 20:15:14

请问楼主你的问题解决了吗，我也碰到了同样的问题

wyxhrz 发表于 2019-7-8 16:16:26

如下网址对该问题描述更详细准确：https://www.eng-tips.com/viewthread.cfm?qid=168404

我也碰到了该问题，我对错误再描述一下：
abaqus版本：2018.
结构：一个2D planar deformable shell（均匀固体截面属性），2条2D discrete rigid wire，采用general contact接触。

abaqus/standard: 不报错，但是变形体不变形。（也就是接触不生效。）


abaqus/explicit:   报错，直接inp读取报错。*CONTACT cannot be defined on 2D element facets.If the model contains 2D or axisymmetric elements then *CONTACT INCLUSIONS, ALL EXTERIOR cannot be specified, and the first surface name on each data line under *CONTACT INCLUSIONS or *CONTACT EXCLUSIONS must not be blank.



fanyajiao 发表于 2020-12-2 16:09:45

请问楼主解决这个问题了吗？如何解决的
页: [1]
查看完整版本: *CONTACT cannot be defined on 2D element facets.