请教一下各位大神这个警告信息是什么意思，改怎么处理
The parameter hourglass on the *section controls option is relevant for solid, membrane, and shell elements with reduced integration wherever applicable. This warning can be ignored if the feature is applied to these element types only.For two-dimensional models, if a non-unity thickness is specified for two-dimensional solid elements and these elements are involved in an interaction such as contact, the same thickness should be specified for the out-of-plane thickness of the corresponding surface under *surface interaction.
Output request evf is not available for element type c3d8r
Output request peeqvavg is not available for element type c3d8r
Output request pevavg is not available for element type c3d8r
Output request svavg is not available for element type c3d8r
Output request damagec is not available for the material for element type c3d8r
Output request damaget is not available for the material for element type c3d8r
Output request evf is not available for element type c3d8r
Output request peeqvavg is not available for element type c3d8r
Output request pevavg is not available for element type c3d8r
Output request sdeg is not available for the material for element type c3d8r
Output request svavg is not available for element type c3d8r
Output request damagec is not available for the material for element type c3d8r
Output request damaget is not available for the material for element type c3d8r
Output request evf is not available for element type c3d8r
Output request peeqvavg is not available for element type c3d8r
Output request pevavg is not available for element type c3d8r
Output request sdeg is not available for the material for element type c3d8r
Output request svavg is not available for element type c3d8r
Output request damagec is not available for the material for element type c3d8r
Output request damaget is not available for the material for element type c3d8r
Output request evf is not available for element type c3d8r
Output request peeqvavg is not available for element type c3d8r
Output request pevavg is not available for element type c3d8r
Output request sdeg is not available for the material for element type c3d8r
Output request svavg is not available for element type c3d8r
Output request damagec is not available for the material for element type t3d2
Output request damaget is not available for the material for element type t3d2
Output request evf is not available for element type t3d2
Output request peeqvavg is not available for element type t3d2
Output request pevavg is not available for element type t3d2
Output request sdeg is not available for the material for element type t3d2
Output request svavg is not available for element type t3d2
The option *boundary,type=displacement has been used; check status file between steps for warnings on any jumps prescribed across the steps in displacement values of translational dof. For rotational dof make sure that there are no such jumps. All jumps in displacements across steps are ignored
There are 35 warning messages in the data (.dat) file.Please check the data file for possible errors in the input file. 没有错误信息， 全部是警告信息而已. 计算可以收敛就行。结果输出选项和单元类型不符，会有些结果无法显示。 maschinen666 发表于 2019-7-2 19:30
没有错误信息， 全部是警告信息而已. 计算可以收敛就行。结果输出选项和单元类型不符，会有些结果无法显示 ...
有错误信息的，计算没有收敛。错误信息是：
The elements contained in element set ErrElemExcessDistortion-Step1 have distorted excessively.
Print-out suppressed for subsequent distorted elements
There are a total of 27 excessively distorted elements
The elements contained in element set ErrElemExcessDistortion-Step1 have distorted excessively.
Abaqus/Explicit Analysis exited with an error - Please see thestatus file for possible error messages if the file exists. maschinen666 发表于 2019-7-2 19:30
没有错误信息， 全部是警告信息而已. 计算可以收敛就行。结果输出选项和单元类型不符，会有些结果无法显示 ...
我想建一个剪力墙的模型，由于是初学者，毫无头绪，就想先照着b站上的一个视频建一个混凝土简支梁练一练，结果弄了两遍了，都出错了，我觉得我和视频里的操作完全是相同的，但就是计算不收敛，实在找不出是什么原因。请大神指点:'( 检查sta file, error massage, 不知道你要计算什么， 一般情况下都是体单元变形过大导致畸变， 计算无法收敛。好好查一下。 maschinen666 发表于 2019-7-3 19:21
检查sta file, error massage, 不知道你要计算什么， 一般情况下都是体单元变形过大导致畸变， 计算无法收 ...
嗯嗯，好的谢谢啦
页:
[1]