连接器connector的stop行为设置
我想设置一个弹簧连接器的stop行为,但是不知道怎样设置上下限,想问一下各位大神,stop行为的上下限是怎么设置的?*CONNECTOR STOP
Specify connector stops for connector elements.
This option is used to define connector stops for connector elements.
Products: Abaqus/StandardAbaqus/ExplicitAbaqus/CAE
Type: Model data
Level: Model
Abaqus/CAE: Interaction module
References:
•“Connector behavior,”Section 31.2.1 of the Abaqus Analysis User's Guide
•*CONNECTOR BEHAVIOR
Required parameter:
COMPONENT
Set this parameter equal to the connector's available component of relative motion number for which connector stops are defined.
Data line to define connector stops:
First (and only) line:
1.Lower limit for the connector's relative position specified by the COMPONENT parameter. If not specified, no lower limit is used.
1.Upper limit for the connector's relative position specified by the COMPONENT parameter. If not specified, no upper limit is used.
页:
[1]