请问:flac3d to tecplot 等值线的值如何显示?
用了斑竹编的fish程序,导出了tecplot数据文件,并在tecpolt里显出了图形但在tecplot里如何显示等值线和数值呢 ?还是不清楚。
也用了 data
extract
slice on plane
contour-label-show label
但还是不行?请高手赐教啊
Re:请问:flac3d to tecplot 等值线的值如何显示?
这个问题,俺也不会,希望有人指点一下。Re:请问:flac3d to tecplot 等值线的值如何显示?
现在解决了 ,^_^。试验了好多次,总于出现了
plot---zone style----contour---contour type---选both line and flood
再结合上边的命令就可以了
Re:请问:flac3d to tecplot 等值线的值如何显示?
感谢dynamax,非常感谢,望还有其它的导出程序出炉啊。分享的确是种奉献精神啊!
Re:请问:flac3d to tecplot 等值线的值如何显示?
楼主,斑竹的FISH 程序哪里有啊?让我也分享一下啊,谢谢Re:请问:flac3d to tecplot 等值线的值如何显示?
好的,放在下面了,很不错,感谢斑竹Re:请问:flac3d to tecplot 等值线的值如何显示?
真的谢了。Re:请问:flac3d to tecplot 等值线的值如何显示?
楼主,请问图中绿色部分的网格是怎样生成的?Re:请问:flac3d to tecplot 等值线的值如何显示?
我是一个新手,请问这是怎么用的,能不能给个简单的例子啊Re:请问:flac3d to tecplot 等值线的值如何显示?
命令菜单data---extract----slice from---就可以选择切面了。
多试几次就明白了
Re:请问:flac3d to tecplot 等值线的值如何显示?
我试过,好像所做的切面只能是云图,或者是云图加等直线,但是在线上加不上数值呀!是不是呀,是不是切片不能做成标有值的等值线图呀?请高手指点一下如何给切片加数值呀?! 还是不知道怎样把flac3d的图导入tecplot, 希望有高手再详细说明一下就好了! 看上去真的不错,就是不知如何用 希望高手给个说明,在此十分感谢!!! 切片上还是加不上数值啊,请高手明示! 谢谢各位大侠 :) :) 谢谢楼主 了呵呵,正用的着~~~~~~~~~ 我的数据读入tecplot中了,可是不显示图。是怎么一回事?烦请各位帮忙解决。谢谢!
页:
[1]
2