平面地基-结构计算
我做平面地基-结构共同作用分析,再重启动进行动力计算时出错,出现以下提示,不知是怎么回事,请大家帮忙?ADINA data input file D:\xyc\Eng-thesis\sh.dat successfully created.
***WARNING: No element connection for node 1 directions 4, 5, 6
No element connection for node 2 directions 4, 5, 6
No element connection for node 3 directions 4, 5, 6
No element connection for node 4 directions 4, 5, 6
No element connection for node 5 directions 4, 5, 6
No element connection for node 6 directions 4, 5, 6
No element connection for node 7 directions 4, 5, 6
No element connection for node 8 directions 4, 5, 6
No element connection for node 9 directions 4, 5, 6
No element connection for node 10 directions 4, 5, 6
No element connection for node 11 directions 4, 5, 6
No element connection for node 12 directions 4, 5, 6
No element connection for node 13 directions 4, 5, 6
No element connection for node 14 directions 4, 5, 6
No element connection for node 15 directions 4, 5, 6
No element connection for node 16 directions 4, 5, 6
No element connection for node 17 directions 4, 5, 6
No element connection for node 18 directions 4, 5, 6
No element connection for node 19 directions 4, 5, 6
No element connection for node 20 directions 4, 5, 6
No element connection for node 21 directions 4, 5, 6
No element connection for node 22 directions 4, 5, 6
No element connection for node 23 directions 4, 5, 6
No element connection for node 24 directions 4, 5, 6
No element connection for node 25 directions 4, 5, 6
No element connection for node 26 directions 4, 5, 6
No element connection for node 27 directions 4, 5, 6
No element connection for node 28 directions 4, 5, 6
No element connection for node 29 directions 4, 5, 6
No element connection for node 30 directions 4, 5, 6
No element connection for node 31 directions 4, 5, 6
No element connection for node 32 directions 4, 5, 6
No element connection for node 33 directions 4, 5, 6
No element connection for node 34 directions 4, 5, 6
No element connection for node 35 directions 4, 5, 6
No element connection for node 36 directions 4, 5, 6
No element connection for node 37 directions 4, 5, 6
No element connection for node 38 directions 4, 5, 6
No element connection for node 39 directions 4, 5, 6
No element connection for node 40 directions 4, 5, 6
No element connection for node 41 directions 4, 5, 6
No element connection for node 42 directions 4, 5, 6
No element connection for node 43 directions 4, 5, 6
No element connection for node 44 directions 4, 5, 6
No element connection for node 45 directions 4, 5, 6
No element connection for node 46 directions 4, 5, 6
No element connection for node 47 directions 4, 5, 6
No element connection for node 48 directions 4, 5, 6
No element connection for node 49 directions 4, 5, 6
No element connection for node 50 directions 4, 5, 6
Message limit reached - above message has been suppressed 1243 times.
Nodal degrees of freedom without element
connection have been fixed for ADINA input data.
There may still be degrees of freedom without
stiffness - see documentation.
Re:平面地基-结构计算
两种可能：1）没有分完网
2）没有合并重合节点
Re:平面地基-结构计算
能否贴个in文件看看Re:平面地基-结构计算
已经解决了,是不同单元在接触处共一个节点,我在节点处定义了坐标相同但编号不同的几个节点,就没有提示出错了.Re:平面地基-结构计算
平面结构没有4 5 6方向的自由度。在control里把这几个自由度限制了就可以了。
页:
[1]