flyingxjr 发表于 2006-5-6 20:00:26

TO tonnywSimWe

你有AdinaT-84温度源程序吗？ 有请发到flyingxjr@sina.com我可以付钱   
那位大侠有   也请帮帮忙

tonnyw 发表于 2006-5-7 10:50:22

看看这个有没有用

DOT is a finite element heat transfer analysis program for both linear and nonlinear two-dimensional planar and axisymmetric heat conduction problems. Material nonlinearities such as temperature-dependent conductivity and specific heat are considered, as well as nonlinear radiation boundary conditions for the case of structures exposed to a fire environment. Element Types: (a) Two dimensional 4-to-8 node isoparametric elements for planar or axisymmetric solids; (b) convection and radiation surface elements; and (c) Cooling pipe elements. The structures to be analyzed may be composed of a combination of these element types. Boundary Conditions: (a) Time-dependent nodal temperatures and/or heat flux specifications; (b) Convective surface heat transfer specifications where the convection coefficient may be temperature dependent and the environmental temperature can vary with time; and (c) Time-dependent internal heat generation. Additionally, the DOT program can analyze nonlinear radiation boundary conditions where the environmental temperature may be time dependent. DETECT performs the steady state or transient heat transfer analysis of two dimensional planar or axisymmetric structures of arbitrary geometry constructed incrementally. It evaluates the temperature distribution during the construction of mass concrete structures such as dams, foundations, and bridge piers.

tonnyw 发表于 2006-5-7 10:51:52

文件太大，给我你的EMAIL.

havvn 发表于 2006-5-17 12:42:33

太好了！！

论坛里边的大侠们都好好啊！！！ 不胜感激了！ 我这里有sap5的源程序想申请上传 可是我是新手 不知道上传的程序 请大侠们指点一下！

tiandi 发表于 2006-7-26 01:58:32

runinwind 发表于 2006-7-26 20:08:39

我发现adina84的源程序中开头的注释行都被删除了，唉，什么都看不懂啊！

liuliukan 发表于 2007-2-26 02:32:34

23楼的 tonnyw 朋友能否给我发邮件啊
liuliukan@163.com

nicolee 发表于 2007-3-1 19:02:06

gerrystranger310@sina.com   谢谢大侠

tanlie 发表于 2007-5-16 14:45:26

23楼的兄弟   给我也传一份   不胜感激   !!!!!!!!!!!!!!!!!!!!!!!!!!!!   
huming19821104@126.com

llxxcc 发表于 2007-6-2 15:29:49

非常不错的资料，可惜没有注释，很难看懂啊
还望有好心人能提供这方面的资料，真是感激不尽！
呵呵^_^

llxxcc 发表于 2007-6-5 10:30:33

RE:ADINA84源程序

哪位大虾有ADINA源程序的注释说明啊，由于上面发的ADINA84源程序没有说明和注释，很难看懂啊！
由于课题需要，求好心人发一份ADINA源程序的注释说明给我lxchao@student.dlut.edu.cn
万分感谢！！

[ 本帖最后由 llxxcc 于 2007-6-5 10:35 编辑 ]

cq510739 发表于 2007-6-11 19:39:48

23楼的 tonnyw 能否给我发一份，谢谢了!
cq510739@163.com

yonglezl 发表于 2007-8-25 22:10:18

我也想要啊
先行谢过了，yonglezl@hhu.edu.cn
顺便建议：你可以问问管理员是不是可以上传到公共邮箱
页: 1 [2]
查看完整版本: 求：ADINA84源程序