pearce 发表于 2008-4-16 22:05:01

请教间隙元(GAP ELEMNT PROPERTY OPTION)设置问题

仔细看了帮助里面的GAP ELEMNT间隙元这一章节,感觉
*GAP只有下面几个参数输入
[*]Initial clearance, d.[*]Global X-direction cosine of the contact direction.[*]Global Y-direction cosine of the contact direction.[*]Global Z-direction cosine of the contact direction.[*]Element cross-sectional area.

[ 本帖最后由 pearce 于 2008-4-16 22:20 编辑 ]

pearce 发表于 2008-4-16 22:08:58

但是在做帮助上面beamgap这个例子的时候总是不能计算,在dat里面有下面的error
WARNING: ONLY A GAP PROPERTY OPTIONMAY BE USED WITH ELEMENT 11 INSTANCE
             PART-1-MESH-1-1. CHECK THAT NO OTHER PROPERTY REFERS TO THIS   ELEMENT.
ERROR: 5 elements are missing property definitions. The elements have been
         identified in element set ErrElemMissingProperty.
这5个单元就是设置的间隙单元,
我也感觉间隙单元应该有张开闭合时刚度参数设置的选项,不知哪位高手了解,指点一下这里是什么原因??

pearce 发表于 2008-4-16 22:19:32

对定义的间隙元,提示类似下面的错误
***ERROR: 5 elements are missing property definitions. The elements have been
         identified in element set ErrElemMissingProperty.
***NOTE: DUE TO AN INPUT ERROR THE ANALYSIS PRE-PROCESSOR HAS BEEN UNABLE TO
          INTERPRET SOME DATA.SUBSEQUENT ERRORS MAY BE CAUSED BY THIS OMISSION

pearce 发表于 2008-4-24 17:03:16

大家都好象没有作过类似的问题哦

pearce 发表于 2008-5-5 22:55:07

旧事重提，因为再idea和ansys里面都可以做，重新拿出beam_gap例子重新做了一下，还是类似的问题
***ERROR: 383 elements are missing property definitions. The elements have
         been identified in element set ErrElemMissingProperty.
***NOTE: DUE TO AN INPUT ERROR THE ANALYSIS PRE-PROCESSOR HAS BEEN UNABLE TO
          INTERPRET SOME DATA.SUBSEQUENT ERRORS MAY BE CAUSED BY THIS OMISSION

zxy19971806 发表于 2020-10-8 19:37:31

我也有这个问题，不知道楼主解决了没
页: [1]
查看完整版本: 请教间隙元(GAP ELEMNT PROPERTY OPTION)设置问题