fantasy206 发表于 2008-7-11 16:05:50

seep/w 改变渗透系数，用不用重新划分网格。

先定义材料后，然后才能划分网格，我想对比一下材料在不同渗透系数下对土坝渗流的影响，不知道重新定义材料的渗透系数后，还用不用在重新划分网格了。

basara 发表于 2008-7-14 09:24:36

不需重新划分网格
New Geometry Based Modeling
You can now define your boundary conditions and material properties on your region geometry, rather than on the finite element mesh. This allows you to freely change your model without worry about losing your existing model definition. For example, if you increase the height of a soil layer, your boundary conditions are moved along with the soil, and a new finite element mesh is automatically generated.

侏罗纪的石头 发表于 2011-4-6 23:23:32

听高手们讨论就是获益匪浅。

小鱼1210 发表于 2012-12-11 23:52:40

应该不需要的 觉得这个软件划分网格很简单的 毕竟是二维嘛
页: [1]
查看完整版本: seep/w 改变渗透系数，用不用重新划分网格。