拓扑优化问题报错
*** OptiStruct defaults set from:install config file: D:\hermesh/hwsolvers/hwsolver.cfg
*** ERROR # 1000 in the input data:
Incorrect data in field # 3.
Detected while reading line 280763 from file
D:/skyqian2/skyqiangoodchenggong4.fem:
"CHEXA 437827 0489377492664492665489378508739508740"
This line was interpreted as:
280763:CHEXA, 437827, 0, 489377, 492664, 492665, 489378, 508739, 508740
Expected INT > 0, foundINTEGER (0).
Syntax error(s) found in bulk data 'CHEXA' card.
*** ERROR # 1000 in the input data:
Incorrect data in field # 3.
Detected while reading line 280765 from file
D:/skyqian2/skyqiangoodchenggong4.fem:
"CHEXA 437826 0489376492663492664489377508737508738"
This line was interpreted as:
280765:CHEXA, 437826, 0, 489376, 492663, 492664, 489377, 508737, 508738
Expected INT > 0, foundINTEGER (0).
Syntax error(s) found in bulk data 'CHEXA' card.
*** ERROR # 1000 in the input data:
Incorrect data in field # 3.
Detected while reading line 280767 from file
D:/skyqian2/skyqiangoodchenggong4.fem:
"CHEXA 437825 0489375492662492663489376508735508736"
This line was interpreted as:
280767:CHEXA, 437825, 0, 489375, 492662, 492663, 489376, 508735, 508736
Expected INT > 0, foundINTEGER (0).
Syntax error(s) found in bulk data 'CHEXA' card.
*** ERROR # 1000 in the input data:
Incorrect data in field # 3.
Detected while reading line 280769 from file 本帖最后由 zkong 于 2009-5-18 13:33 编辑
property id 不能为0, 应该是一个PSOLID property id.
授人以鱼不若授人以渔 :)
建议花点精力研究一下错误信息和帮助文档中的说明,一般OptiStruct的错误信息是很精确的。 比如这个例子中说:
Incorrect data in field # 3.
......
5 r( H& s( R* j7 q/ g- p& N
asdasd
...
Expected INT > 0, foundINTEGER (0).
说明第三个field, 需要一个INT(整数)>0, 但是实际输入的是0。查看一下CHEXA卡片的文档会发现,field 3是PID.
PID
Identification number of a PSOLID property entry.
Default = EID (Integer > 0)
8 \4 a" E4 ?; x* d
页:
[1]