【资料】推荐一本好书MATLAB.Codes.for.Finite.Element.Analysis(有限元分析代码)
本帖最后由 messenger 于 2011-4-24 21:09 编辑请尊重作者的知识产权，仅供个人交流参考！呵呵
本人认为确实是一本好书！共29个，传了我3天！
书名：《MATLAB.Codes.for.Finite.Element.Analysis》作者：Antonio Ferreira
Preface
This book intend to supply readers with some MATLAB codes for finite element
analysis of solids and structures.
After a short introduction to MATLAB, the book illustrates the finite element
implementation of some problems by simple scripts and functions.
The following problems are discussed:
• Discrete systems, such as springs and bars
• Beams and frames in bending in 2D and 3D
• Plane stress problems
• Plates in bending
• Free vibration of Timoshenko beams and Mindlin plates, including laminated
composites
• Buckling of Timoshenko beams and Mindlin plates
The book does not intends to give a deep insight into the finite element details,
just the basic equations so that the user can modify the codes. The book was
prepared for undergraduate science and engineering students, although it may be
useful for graduate students.
The MATLAB codes of this book are included in the disk. Readers are welcomed
to use them freely.
The author does not guarantee that the codes are error-free, although a major
effort was taken to verify all of them. Users should use MATLAB 7.0 or greater
when running these codes.
Any suggestions or corrections are welcomed by an email to ferreira@fe.up.pt.
Porto, Portugal.
Antonio Ferreira
2008
...rectangularMesh、drawingMesh等类似函数的code...
google下即可搜到
http://extras.springer.com/2009/978-1-4020-9199-5/MATLABsoftware
不过个人没试过 for.Finite.Element.Analysis
:loveliness:
PS： 话说SIMWE附件上传真是鸡肋... 书名全称是什么，作者是那个？
楼主把它发全啊 已经改了，且全了，就是29，有点重复 7# plaxis 本帖最后由 messenger 于 2009-12-4 14:20 编辑
从网友回贴的情况来看，此贴资料无论是从下载还是内容介绍都已经没有问题，大家回贴也只是顶贴，因此大家只是下载就行了，此贴关闭三个月。三个月后大家还可以将其顶起来，拿 出来晒晒，以免沉得太深，无人问津了。 刚下了看看，发现这本书中的2D问题程序中没有列出rectangularMesh函数的code，程序无法执行，请问楼主有相应的code吗？不胜感谢 请问楼主，书里第56页14行调用的drawingMesh是怎么一回事啊？你有这个drawingMesh.m文件么？PS：正在有限元编程，刚学的matlab，一直把matlab当c语言用呢。看了这本书才知道matlab的强大，太强大了 这本书确实缺rectangularMesh、drawingMesh等类似函数的code 文件太多了，没那么多钱 啊 请问一下大家都有rectangularMesh、drawingMesh等类似函数的code吗？小弟也正在寻找。 好像还缺啊 thank you very much 多谢楼主贡献！ 第28个包是哪个？没有啊 书里的源码能发一下吗，谢谢楼主 下载了，正好在学有限元，多谢楼主 需要好好学习！ 谢谢楼主提供的好资料！ 谢谢 ！这个挺好:)
页:
[1]
2