论坛 › A03：ADINA › 保存Dat文件又出错

汪钰 发表于 2010-3-17 10:39:37

保存Dat文件又出错

大家好！本人保存Dat文件时，出现了新错误，期待高手赐教！

汪钰 发表于 2010-3-18 08:59:55

麻烦高手赐教！

wild_field 发表于 2010-3-18 09:06:35

不要重复发差不多的帖子，否则就要扣分了。模型出现错误很正常，肯定是模型设置有问题，但仅凭几张图片别人是看不出什么的。明白了吗？

汪钰 发表于 2010-3-18 09:13:13

哦，明白了，谢谢！我自己再检查检查

tonnyw 发表于 2010-3-18 11:37:41

Your step size is not constant for the whole analysis. Did you change your step size for different time intervals?

汪钰 发表于 2010-3-18 19:21:52

Thank you for tonnyw's advice. You are so kind!

汪钰 发表于 2010-3-18 20:06:07

Hi! I have changed the step size for different time intervals, but the error still appear. I'm just a beginner. please help me! Help! help!

tonnyw 发表于 2010-3-18 22:48:59

How about this? Simplify your model so that the total number of nodes is within 900. I may take a look if you upload *.in file.

汪钰 发表于 2010-3-19 09:19:07

The total number of nodes is 18446. I'll upload files, and then reduce the nodes to 900.

汪钰 发表于 2010-3-19 09:24:15

This is the command stream.

tonnyw 发表于 2010-3-19 10:41:09

10# 汪钰

The *.in file doesn't work. Could you upload *.idb file?

汪钰 发表于 2010-3-19 11:48:06

To be continue.

汪钰 发表于 2010-3-19 11:51:13

To be continue

汪钰 发表于 2010-3-19 12:06:44

here it is.

汪钰 发表于 2010-3-19 12:07:49

The end !!

tonnyw 发表于 2010-3-19 12:29:54

15# 汪钰

I am sorry. My Adina can only handle maximum 900 nodes.

Do you mind remodeling your model with coarse mesh and uploading the *.idb file again?

Thanks.

汪钰 发表于 2010-3-19 14:54:51

Ok! I'll try.

汪钰 发表于 2010-3-19 21:45:28

Here is the coarse model.

汪钰 发表于 2010-3-19 21:54:18

对不起，您最近 24 小时上传的附件已超过 1000K 的限制，无法继续上传，请或稍后再试。

汪钰 发表于 2010-3-21 08:45:05

Here is it.

查看完整版本: 保存Dat文件又出错