wuhai111 发表于 2010-12-13 09:14:34

这个错误怎么解决

我在运行模型的时候，定义了内部分界面，用的是interface，开挖之后就出现了这个错误，怎么解决呢？file:///C:/Documents%20and%20Settings/Administrator/Application%20Data/Tencent/Users/23614995/QQ/WinTemp/RichOle/G3%7B@V

wuhai111 发表于 2010-12-13 09:22:55

补上错误代码
!WARNING: Stiffness of Interface node 1 is zero!
!WARNING: Stiffness of Interface node 2 is zero!
!WARNING: Stiffness of Interface node 3 is zero!
!WARNING: Stiffness of Interface node 4 is zero!
!WARNING: Stiffness of Interface node 5 is zero!
!WARNING: Stiffness of Interface node 6 is zero!
!WARNING: Stiffness of Interface node 7 is zero!
!WARNING: Stiffness of Interface node 8 is zero!
!WARNING: Stiffness of Interface node 9 is zero!
!WARNING: Stiffness of Interface node 10 is zero!
!WARNING: Stiffness of Interface node 11 is zero!
!WARNING: Stiffness of Interface node 12 is zero!
!WARNING: Stiffness of Interface node 13 is zero!
!WARNING: Stiffness of Interface node 14 is zero!
!WARNING: Stiffness of Interface node 15 is zero!
!WARNING: Stiffness of Interface node 16 is zero!

mthinking 发表于 2010-12-13 15:13:39

有是网格节点的问题，首先检查你的各个部分参数赋值是否到位、正确，如果没有问题再看你建立的网格节点有没有问题，仔细检查，这种问题一般都在很细小的地方。

mazhongyuan9049 发表于 2010-12-13 15:58:22

有部分接触面没有赋参数，你看一下命令流，是否将所有的接触面都赋值了。

wuhai111 发表于 2010-12-14 14:04:16

我是首先赋值了接触面，然后开挖之后就出现了这个问题

wuhai111 发表于 2010-12-14 14:04:29

开挖之后，接触面有的值没有呢？
页: [1]
查看完整版本: 这个错误怎么解决