焊接模拟
adina焊接模拟是不是像ansys和abaqus一样需要撰写子程序?? 官方网站上貌似有例子,去看看呗。。看你需要模拟的精度了,有些ADINA达不到你所需要的所有功能,那就需要开发了~ 官方网站上貌似只有图片,具体的操作还是不大清楚呀 焊接模拟需要用到单元的生死,我记得ansys上面有相关具体的例子,你可以按照同样的模型在adina中试一下( ⊙ o ⊙ )啊! 1# maible adina焊接模拟是不是像ansys和abaqus一样需要撰写子程序??maible 发表于 2011-7-21 15:33 http://forum.simwe.com/images/common/back.gif
There is a book:
Computational welding mechanics: Thermomechanical and microstructural simulations by Lars-Erik Lindgren
If you can get it and read it, it might be helpful. 移动热源的问题是解决了,就是做起来比ansys麻烦多了。。。还有个问题就是在apply on nodes/elements选项里,我设置的时候,发现有element face要选择,里面3,2,1,-1,-2,-3这个几个选项,实验了一下,还是没搞懂这些是干嘛用的,找了半天资料也没发现解释 请问你移动热源是不是加到节点或单元上,然后通过每个单元的Arrival time来实现的?6# maible
页:
[1]