求助这个模型网格划分有命令流

drl123

/TITLE,3D Magnetic    Ansys  
!define title name
/PREP7   !preprocessor
ET,1,SOLID117
MPTEMP,,,,,,,,  
MPTEMP,1,0  
MPDATA,MURX,1,,1
MPTEMP,,,,,,,,  
MPTEMP,1,0  
MPDATA,MGXX,2,,0
MPDATA,MGYY,2,,-919000  
MPDATA,MGZZ,2,,0
MPTEMP,,,,,,,,  
MPTEMP,1,0  
MPDATA,MGXX,3,,0
MPDATA,MGYY,3,,919000   
MPDATA,MGZZ,3,,0

TB,BH,2,1,9,   !Material Props->Material Models
TBTEMP,0
TBPT,,0,0   
TBPT,,919000-840000,0.104   
TBPT,,919000-720000,0.263   
TBPT,,919000-600000,0.422   
TBPT,,919000-480000,0.580   
TBPT,,919000-360000,0.739   
TBPT,,919000-240000,0.898   
TBPT,,919000-120000,1.056   
TBPT,,919000,1.215
TBPLOT,BH,2   !Utility Menu->Plot->Data Tables
/IMAGE,SAVE,BH2,JPEG   !This command cannot be accessed from a menu
TB,BH,3,1,9,
TBTEMP,0
TBPT,,0,0   
TBPT,,919000-840000,0.104   
TBPT,,919000-720000,0.263   
TBPT,,919000-600000,0.422   
TBPT,,919000-480000,0.580   
TBPT,,919000-360000,0.739   
TBPT,,919000-240000,0.898   
TBPT,,919000-120000,1.056   
TBPT,,919000,1.215
  
TB,BH,4,1,7,
TBTEMP,0
TBPT,,500,0.5250
TBPT,,1000,1.0100   
TBPT,,2500,1.2550   
TBPT,,5000,1.4550   
TBPT,,7500,1.6200   
TBPT,,10000,1.7500  
TBPT,,15000,1.8400
TBPLOT,BH,4
/IMAGE,SAVE,BH4,JPEG
wpro,45,,
BLOCK,-6,138,-6,0,0,170,
BLOCK,-6,0,-6,138,0,170,
FLST,2,2,6,ORDE,2   
FITEM,2,1   
FITEM,2,-2  
VADD,P51X
wpro,-45,,
block,-73,73,90,105,0,130   !!!!!!衔铁
block,-73,-35,78,90,0,130
block,35,73,78,90,0,130   !!!!!!!!磁铁
K,41,35,35,0,   
K,42,73,73,0,   
FLST,2,4,3  
FITEM,2,41  
FITEM,2,42  
FITEM,2,36  
FITEM,2,34  
A,P51X
VOFFST,33,130, ,
K,47,-35,35,0,  
K,48,-73,73,0,  
FLST,2,4,3  
FITEM,2,47  
FITEM,2,48  
FITEM,2,26  
FITEM,2,28  
A,P51X
VOFFST,39,-130, ,     !!!!!!!极靴

FLST,2,5,3  
FITEM,2,33  
FITEM,2,27  
FITEM,2,47  
FITEM,2,17  
FITEM,2,41  
A,P51X  
VOFFST,45,130, , !!!!!极靴间空气
block,-153,153,-46,130,0,210   !!!!!!!大空气
wpro,,-90
cswpla,11,0,1,1,
wpcsys,-1,11,
cylind,0,2,-46,-2,-180,0,
cylind,0,2,-2,2,-180,0,
cylind,0,2,2,130,-180,0,
wpcsys,-1,0,
vovlap,all
numcmp,volu

senja

求助的东西至少应该是自己尝试了之后搞不定的吧，也就是说发帖的时候吧自己遇到的问题和错误，甚至是自己的一点要求发上来。
目前这样没问题描述直接给命令流让分网很不好，别人可以理解为你没尝试过直接想要结果页未尝不可。完善一下问题描述吧