- 积分
- 35
- 注册时间
- 2004-10-14
- 仿真币
-
- 最后登录
- 1970-1-1
|
就过了个圣诞节,补丁已经发到15.0.5了。
Release 15.0.1 Readme
This service pack addresses a defect related to fluids models with 0-thickness walls (baffles).
In the ANSYS 15.0 release, baffles are captured in the mesh (nodes are on the baffle faces), but the baffles do not display properly in Workbench Meshing when viewing the mesh on named selections, nor do they output correctly to Fluent, CFX, or Polyflow.
All ANSYS users performing fluids analysis on models that contain baffles and are intended for the Fluent, CFX, or Polyflow solvers must install this service pack.
Release 15.0.3 Readme
This release addresses a version 15.0 issue in which ANSYS LS-DYNA failed with a stack overflow issue on the Windows operating system only (not Linux). This release fixes the issue by increasing the stack size used. There are no changes to the binary code, only the stack size limit which is specified when linking the object modules.
Release 15.0.4 Readme
This service pack addresses a licensing issue encountered by TurboGrid users on Windows 64–bit platforms. Upon startup, TurboGrid was checking out both a TurboGrid and an ICEM license.
Release 15.0.5 Readme
This release addresses issues discovered when performing analysis with ANSYS, Inc. Mechanical Rigid Body Dynamics or any mechanical models with joints. The data supplied by the ANSYS, Inc. Mechanical Redundancy Analysis tool was not being updated after the redundancy analysis was performed. Consequently, there was no way to identify redundant or inconsistent constraints.
|
评分
-
1
查看全部评分
-
|