应力约束问题

1292761134

请问在拓扑优化变量设置面板中的stress constraint是指什么应力？是指哪种应力的上限值吗？还请各位指点一下。

1292761134

请大家帮忙解答一下。

TYNGOD

1.Von Mises stress constraints may be defined for topology and free-size optimization through the STRESS optional continuation line on the DTPL or the DSIZE card.  There are a number of restrictions with this constraint:
        The definition of stress constraints is limited to a single von Mises permissible stress.  The phenomenon of singular topology is pronounced when different materials with different permissible stresses exist in a structure.  Singular topology refers to the problem associated with the conditional nature of stress constraints, that is, the stress constraint of an element disappears when the element vanishes.  This creates another problem in that a huge number of reduced problems exist with solutions that cannot usually be found by a gradient-based optimizer in the full design space.
        Stress constraints for a partial domain of the structure are not allowed because they often create an ill-posed optimization problem since elimination of the partial domain would remove all stress constraints.  Consequently, the stress constraint applies to the entire model when active, including both design and non-design regions, and stress constraint settings must be identical for all DSIZE and DTPL cards.
        The capability has built-in intelligence to filter out artificial stress concentrations around point loads and point boundary conditions.  Stress concentrations due to boundary geometry are also filtered to some extent as they can be improved more effectively with local shape optimization.
        Due to the large number of elements with active stress constraints, no element stress report is given in the table of retained constraints in the .out file.  The iterative history of the stress state of the model can be viewed in HyperView or HyperMesh.
        Stress constraints do not apply to 1D elements.
        Stress constraints may not be used when enforced displacements are present in the model.