UGS180和abaqus 6.3怎样才能在WIN2000中共存

harbinliying

今天刚刚将UG装上，但我的ABAQUS 6.3１却不能启动了，有谁知道原因请指点一下，非常感谢！  
说是找不到exceed7.1的路径,可是我装的是exceed6.2,难道UG中的exceed是7.1吗?
应该怎样处理呀

hxzdavid

上面的方法应该是可行的，ug和abaqus的licence是无法共存的，就像ug和ansys一样无法共存，必须停用一个licence！
还有一种比较差的方法，就是一台机子上装两个系统，然后分别安装ug和abaqus。
我的机子空间大，装两个系统就解决了这种问题，反正我玩什么就进那个系统！
当然，有两台机子是最好不过的！

hcui

I am using the Ug NX2.0 and ABAQUS 6.4, I also had same problem.  
The problem is that the port number of UG and ABAQUS are same like 1700 or 27000, sorry I can't remember..
  
Solving method... just change either of them into another port number..
like
ug:    1700@host_name
Abaqus 17000@host_name
  
good luck

chenhu

hcui wrote:
I am using the Ug NX2.0 and ABAQUS 6.4, I also had same problem.  
The problem is that the port number of UG and ABAQUS are same like 1700 or 27000, sorry I can't remember..
  
Solving method... just change either of them into another port number..
like
ug:    1700@host_name
Abaqus 17000@host_name
  
good luck

  
yeah,its a good idea!
let's try!

cafe0519

10个人会有10种处理方法,但是都能共存。