【转帖】UG安装说明(180,190)

peter_panzg

山人CAD时空--学习园地  
题目:UG18安装说明
--------------------------------------------------------------------------------
  
UG18安装说明
  
UG180在NT_2000下的安装：
  
1、安装类型选择Bypass license configuration，然后安装。  
  
2、安装完之后在crack目录下复制flexlm.cpl文件，放在目录C:\WINNT  
\system32下粘贴，并双击运行。
  
3、在crack目录下复制uglmd.exe文件，在安装UGS的目录F:\UGS180\UGFLEXLM下  
粘贴。  
  
4、在crack目录下复制libugft.dll和libuglm.dll文件，在目录F:\UGS180\UGII  
下粘贴，覆盖原文件。  
  
5、在crack目录下复制ug180.dat文件，在目录F:\UGS180\LICENSE下粘贴。  
  
6、用记事本打开F:\UGS180\LICENSE\ug180.dat文件，修改如下：  
SERVER <name> ANY 740  
~~~~~~  
为你的电脑名，例如cax2001
VENDOR uglmd F:\UGS180\UGFLEXLM\uglmd.exe------指向文件glmd.exe的路径。  
保存。  
  
7、在桌面上右键单击“我的电脑”>“属性”>“高级”>“环境变量”，
新建系统变量如下：  
  
变量名：UGII_LICENSE_FILE  
变量值：F:\UGS180\LICENSE\ug180.dat  
8、进入控制面板，设置flexlm管理服务，并且启动服务。
(Now open the flexLM applet. Now setup the server - lmgrd.exe is in  
the ugflexlm dir as should the debug.log go , start the server,  
check the debug log that it started, otherwise, u must go back and  
see that you did it correctly.)  
  
----------------------------------------------
  
Unpack. Install.
  
1) Run setup. Select "Bypass license configuration."
2) After setup is done, copy flexlm.cpl to system32 dir.
3) Now copy uglmd.exe to UG18\UGFLEXLM dir.
4) Copy the 2 dlls into UG18\UGII dir and overwrite them.
5) Copy the dat file to UG18\LICENSE dir.
6) Now open the .dat file in notepad. Edit it so that:
SERVER yourcomputer ANY 740
- yourcomputer is your computers network name. Example
MM.
The vendor path must point at uglmd.exe, wherever it
is installed.
7) Now goto control panel, and open up the system control.
Goto the environment, and edit the environement variable:
UGII_LICENSE_FILE to 744@yourcomputer - your computer  
being your network name.
8) Now open the flexLM applet. Now setup the server -  
lmgrd.exe is in the ugflexlm dir as should the debug.log go
, start the server,
check the debug log that it started, otherwise, u must go back  
and see that you did it correctly.
You are now ready to run UG18.  
:D:D:D:D:D:D:D:D:D:D
  
  UGII v190安装说明
  By  cax2001
http://cax2001.51.net/install/UG190/UGII%20v190.htm