一个有关tie的warning

xzyzqs

For *tie pair (part-2-1_surf-2-a-part-1-1_surf-1-a), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (part-3-1_surf-3-b-part-2-1_surf-2-b), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
For *tie pair (part-4-1_surf-4-c-part-3-1_surf-3-c), adjusted nodes with very small adjustments were not printed. Specify *preprint,model=yes for complete printout.
Boundary conditions are specified on inactive dof of 4 nodes. The nodes have been identified in node set WarnNodeBCInactiveDof.
请假各位大侠，adjusted nodes with very small adjustments were not printed是什么意思？是不是要执行Specify *preprint,model=yes for complete printout这个命令就可以；Boundary conditions are specified on inactive dof of 4 nodes. The nodes have been identified in node set WarnNodeBCInactiveDof.是什么意思！为为什么会这样！！

xzyzqs

成长需要代价，但是我还是希望和大家分享我的成果，后面一句“Boundary conditions are specified on inactive dof of 4 nodes. The nodes have been identified in node set WarnNodeBCInactiveDof”是说模型中有四个点，被过约束，我的模型中既tie,又在该点上定义了边界条件，所以出现了这样的错误！