Model and animation by Sheldon Imaoka. [ANSYS 6.1]
Zipped AVI animation of equivalent elastic strains of a rubber boot. Modeled with SOLID185 (fully incompressible Mixed U-P) and Neo-Hookean model with surface-to-surface contact (rigid-deformable and self-contact). Three load steps comprise of (a) initial interference fit, (b) pull down boot in -y direction, (c) rotate rigid shaft.
Model and animation by Sheldon Imaoka. [ANSYS 6.0]
GIF animation of equivalent stress in rubber bushing. Use of SOLID185 with large-strain viscoelasticity (beta at 6.0) and 2-term Mooney-Rivlin. Rigid-deformable contact and self-contact. Assumes 5% relaxation; note that as the load is released, the true-stress vs. true-strain curve plotted in upper-right corner shows relaxation. A point in compression and another point in tension is plotted, and true stress-strain curve does not follow original path.
Model and animation by Sheldon Imaoka. [ANSYS 6.1]
Zipped AVI file of animation of pinched cylinder. SOLID185 elements with Ogden hyperfoam model (for compressible foam-type rubbers) with viscoelasticity, relaxation to 50% for both shear and bulk moduli with different relaxation times. Contours of von Mises stress along with reaction force history animated.
Model and animation by Sheldon Imaoka. [ANSYS 6.1]
Zipped AVI animation of equivalent stresses of an axisymmetric model. An o-ring is constrained in three directions by rigid walls. One of the rigid walls compresses the o-ring, then an external pressure is applied from below