173| 1
|
[UG MoldWizard] 导出stl模型报错,发现负坐标体,请问如何解决 |
Archiver|小黑屋|联系我们|仿真互动网 ( 京ICP备15048925号-7 )
GMT+8, 2024-3-29 19:51 , Processed in 0.028505 second(s), 14 queries , Gzip On, MemCache On.
Powered by Discuz! X3.5 Licensed
© 2001-2024 Discuz! Team.