【讨论】Patran&nastran安装求救

luomadiwang

MSC Patran 2004  
  
Note: MS C++ v6 with sp5 is required to be preinstalled  
      for the thermal option.  
  
1. Open the license.dat in the crack directory and change  
   host on the first line to your computer name.  
    
2. Run setup and install Flexlm 9.2 license server. When  
   prompted for a license file point the browser to the  
   license.dat in the crack directory. Ignore any messages  
   about the license and hit next.  
    
3. Run setup and install Nastran 2004.  
  
4. Run setup and install Patran. When prompted for a license  
   sever type in 1700@host with host being your computer name.  
   You be asked if you want to set you solver preferences. Select  
   yes for both Nastran and Marc. By default it will point to  
   correct directories.  
  
4. Open nast2004.rcf file in MSC\Msc.Software\conf and  
   "Auth=" on the 4th line to "Auth=1700@host" with  
   host being your computer name.  
    
5. Set you license environment (or check):  
  
   MSC_LICENSE_FILE = 1700@host (host being your computer name)  
    
6. Reboot and run the program.  
根据以上流程安装
Patran可以用
但是Nastran不能求解
P3_TRANS.INI也已经改了
望有心人帮忙

hptji

把 Job Manager 卸了 :D

trueblue

我的也是呀
怎么处理呀

来帮帮忙吧
thanks

光的轨迹

我也是这么安装的,patran运行的非常慢,但是不知道nastran能不能用我运行了一个例子是安装后自带的,运行后生成了.f06文件不是到是不是算成功了?

luomadiwang

根据如上改了
不要安装job assiant manager是可以自动调用求解的

lichunyang

光的轨迹，你的已经安装成功！另外，装patran前没必要装MS C++ v6 with sp5，除非你要用材料库！