假人模型只算55步之谜

nuaayi · 发表于 2008-8-28 16:35:56

我采用dytran自带的ATB假人模型进行仿真分析，但是计算只进行55步就停止了，有谁能帮帮我啊！

DATE  :28-08-08  TIME  :16:30:43



%W-P3146305-P3_SWAP_NEW_RBE2_OLD,,,
      All moments of inertia are zero for MATRIG or RBE2-FULLRIG MR3
      The grid points probably have the same coordinates.

%W-P3146305-P3_SWAP_NEW_RBE2_OLD,,,
      All moments of inertia are zero for MATRIG or RBE2-FULLRIG MR2
      The grid points probably have the same coordinates.

%I-P4142610-P4_CONT_OSCNTC_V4,,,
      The suggested number of cubes from the contact cube sorting algoritm is
      116032. LIMCUB is set to 2000
      The contact runs faster if LIMCUB is raised to at least the number
      that is suggested by the algoritm. This can be achieved by setting
      PARAM,LIMCUB to 116032 at the beginning of a new analysis.
      Please note that more memory will be used and it is not allowed in a
      restart analysis.

%I-P3044801-P3_WRITE_RBE2_SUMMARY,,,
      For a comlete MATRIG-RBE2 summary including a list of grid points for
      each assembly, please use PARAM,RBE2INFO,GRIDON



JOBNAME IS: JIAREN
----------------------------------------------------
MSC.Dytran 2004 Single-CPU Windows
SUMMARY OF MESSAGES (INCLUDING NON-PRINTED MESSAGES)
INFORMATIVE       :    2
WARNINGS          :    2
NO ERRORS

nuaayi · 发表于 2008-8-28 16:36:17

DATE  :28-08-08  TIME  :16:30:43


F I L E O U T P U T I N F O R M A T I O N


JOBNAME IS: JIAREN
------------------

CYCLE    TIME    TYPE FILE NAME

   0 0.00000E+00 ARCHIVE JIAREN_REN_0.ARC
   1 0.10000E-08 ARCHIVE JIAREN_REN_0.ARC
   2 0.21000E-08 ARCHIVE JIAREN_REN_0.ARC
   3 0.34200E-08 ARCHIVE JIAREN_REN_0.ARC
   4 0.50040E-08 ARCHIVE JIAREN_REN_0.ARC
   5 0.69048E-08 ARCHIVE JIAREN_REN_0.ARC
   6 0.91858E-08 ARCHIVE JIAREN_REN_0.ARC
   7 0.11923E-07 ARCHIVE JIAREN_REN_0.ARC
   8 0.15207E-07 ARCHIVE JIAREN_REN_0.ARC
   9 0.19149E-07 ARCHIVE JIAREN_REN_0.ARC
10 0.23879E-07 ARCHIVE JIAREN_REN_0.ARC
11 0.29555E-07 ARCHIVE JIAREN_REN_0.ARC
12 0.36365E-07 ARCHIVE JIAREN_REN_0.ARC
13 0.44539E-07 ARCHIVE JIAREN_REN_0.ARC
14 0.54346E-07 ARCHIVE JIAREN_REN_0.ARC
15 0.66116E-07 ARCHIVE JIAREN_REN_0.ARC
16 0.80239E-07 ARCHIVE JIAREN_REN_0.ARC
17 0.97186E-07 ARCHIVE JIAREN_REN_0.ARC
18 0.11752E-06 ARCHIVE JIAREN_REN_0.ARC
19 0.14193E-06 ARCHIVE JIAREN_REN_0.ARC
20 0.17121E-06 ARCHIVE JIAREN_REN_0.ARC
21 0.20636E-06 ARCHIVE JIAREN_REN_0.ARC
22 0.24853E-06 ARCHIVE JIAREN_REN_0.ARC
23 0.29913E-06 ARCHIVE JIAREN_REN_0.ARC
24 0.35986E-06 ARCHIVE JIAREN_REN_0.ARC
25 0.43273E-06 ARCHIVE JIAREN_REN_0.ARC
26 0.52018E-06 ARCHIVE JIAREN_REN_0.ARC
27 0.62512E-06 ARCHIVE JIAREN_REN_0.ARC
28 0.75104E-06 ARCHIVE JIAREN_REN_0.ARC
29 0.90215E-06 ARCHIVE JIAREN_REN_0.ARC
30 0.10835E-05 ARCHIVE JIAREN_REN_0.ARC
31 0.13011E-05 ARCHIVE JIAREN_REN_0.ARC
32 0.15622E-05 ARCHIVE JIAREN_REN_0.ARC
33 0.18755E-05 ARCHIVE JIAREN_REN_0.ARC
34 0.22515E-05 ARCHIVE JIAREN_REN_0.ARC
35 0.27027E-05 ARCHIVE JIAREN_REN_0.ARC
36 0.32442E-05 ARCHIVE JIAREN_REN_0.ARC
37 0.38939E-05 ARCHIVE JIAREN_REN_0.ARC
38 0.46736E-05 ARCHIVE JIAREN_REN_0.ARC
39 0.56092E-05 ARCHIVE JIAREN_REN_0.ARC
40 0.67320E-05 ARCHIVE JIAREN_REN_0.ARC
41 0.80793E-05 ARCHIVE JIAREN_REN_0.ARC
42 0.96960E-05 ARCHIVE JIAREN_REN_0.ARC
43 0.11636E-04 ARCHIVE JIAREN_REN_0.ARC
44 0.13964E-04 ARCHIVE JIAREN_REN_0.ARC
45 0.16758E-04 ARCHIVE JIAREN_REN_0.ARC
46 0.20110E-04 ARCHIVE JIAREN_REN_0.ARC
47 0.24133E-04 ARCHIVE JIAREN_REN_0.ARC
48 0.28961E-04 ARCHIVE JIAREN_REN_0.ARC
49 0.34754E-04 ARCHIVE JIAREN_REN_0.ARC
50 0.41706E-04 ARCHIVE JIAREN_REN_0.ARC
51 0.50048E-04 ARCHIVE JIAREN_REN_0.ARC
52 0.60059E-04 ARCHIVE JIAREN_REN_0.ARC
53 0.72071E-04 ARCHIVE JIAREN_REN_0.ARC
54 0.86486E-04 ARCHIVE JIAREN_REN_0.ARC
55 0.10378E-03 ARCHIVE JIAREN_REN_0.ARC

nuaayi · 发表于 2008-8-28 16:39:15

liuxiaochuan · 发表于 2008-8-29 11:06:02

你的截止计算步台少了，3000步当然在 0.10378E-03秒推退出了

nuaayi · 发表于 2008-9-23 09:45:49

不是啊，我把时间调整了，还是不行啊，只能算55步（0.10378E-03）

[ 本帖最后由 nuaayi 于 2008-9-23 09:49 编辑 ]

账号		自动登录	找回密码
密码			注册

账号		自动登录	找回密码
密码			立即注册

[Dytran算例讨论] 假人模型只算55步之谜

相关帖子

本帖子中包含更多资源

回复 3# nuaayi 的帖子