急求！！！ ERROR # 1479 错误解决办法！！
*** ERROR # 1479 *** in the input data:Incorrectly formatted numeric data in field 9.
(If it is a character field, it should start with a letter.)
Detected while reading line 95180 from file 各位大侠帮忙啊、、、、、
第95180行是什么啊？看看模型文件啊 本帖最后由 zxt304 于 2012-3-17 10:17 编辑
求大侠指教！！！！
************************************************************************
** **
** **
** OptiStruct 10.0 **
** **
** Design and Optimization Software **
** from Altair Engineering, Inc. **
** **
** **
** Windows XP ProfessionalSP3 (Build 2600)ZHANGXUETAO-PC **
** 2 CPU:Intel(R) Pentium(R) DualCPUE2180@ 2.00GHz **
** CPU speed2000 MHz **
** 1148 MB RAM,3933 MB swap **
** **
** Build tag: 0466938_5333O00_Ci3242M-000 4000 **
************************************************************************
**COPYRIGHT (C) 1996-2009 Altair Engineering, Inc.**
** All Rights Reserved.Copyright notice does not imply publication. **
** Contains trade secrets of Altair Engineering, Inc. **
** Decompilation or disassembly of this software strictly prohibited. **
************************************************************************
*** OptiStruct defaults set from:
install config file: d:\Altair\hw10.0/hwsolvers/hwsolver.cfg
*** ERROR # 1479 *** in the input data:
Incorrectly formatted numeric data in field 9.
(If it is a character field, it should start with a letter.)
Detected while reading line 95190 from file F:/zuizhongyouhuafenxi/2.fem:
"PBEAML 27 1 +"
Syntax error in the current line:
95190:PBEAML, 27, 1, , , , , , >ERROR<
*** ERROR # 1479 *** in the input data:
Incorrectly formatted numeric data in field 9.
(If it is a character field, it should start with a letter.)
Detected while reading line 95196 from file F:/zuizhongyouhuafenxi/2.fem:
"PBEAML 28 1 +"
Syntax error in the current line:
95196:PBEAML, 28, 1, , , , , , >ERROR<
*** WARNING # 1072
DCONSTR lower bound of 0.0 replaced with 1.0E-7.
It is suggested to leave unimportant bounds blank.
Detected while reading line 111 from file F:/zuizhongyouhuafenxi/2.fem:
"DCONSTR 1 20.0 237.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46332 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70796 69435 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46333 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70797 69436 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46334 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70800 69438 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46335 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70801 69437 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46336 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70805 69440 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46337 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70806 69439 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46338 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70809 69441 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46339 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70810 69442 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46340 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70813 69444 00.0 0.0 0.0 0.0"
*** WARNING # 1051
CONM2 data has zero or negative mass.
Detected while reading line 46341 from file F:/zuizhongyouhuafenxi/2.fem:
"CONM2 70814 69443 00.0 0.0 0.0 0.0"
*** More of WARNING messages # 1051 were suppressed...
*** ERROR # 1479 *** in the input data:
Incorrectly formatted numeric data in field 9.
(If it is a character field, it should start with a letter.)
Detected while reading line 95190 from file F:/zuizhongyouhuafenxi/2.fem:
"PBEAML 27 1 +"
Syntax error in the current line:
95190:PBEAML, 27, 1, , , , , , >ERROR<
*** ERROR # 1479 *** in the input data:
Incorrectly formatted numeric data in field 9.
(If it is a character field, it should start with a letter.)
Detected while reading line 95196 from file F:/zuizhongyouhuafenxi/2.fem:
"PBEAML 28 1 +"
Syntax error in the current line:
95196:PBEAML, 28, 1, , , , , , >ERROR<
************************************************************************
RESOURCE USAGE INFORMATION
--------------------------
MAXIMUM MEMORY USED 60 MB
MAXIMUM DISK SPACE USED 0 MB
************************************************************************
************************************************************************
COMPUTE TIME INFORMATION
------------------------
EXECUTION STARTED Sat Mar 17 10:02:39 2012
EXECUTION COMPLETED Sat Mar 17 10:02:41 2012
ELAPSED TIME 00:00:01
CPU TIME 00:00:01
************************************************************************
*** PROGRAM STOPPED: FATAL ERROR(s) ENCOUNTERED.
***** END OF REPORT *****
For Useful OptiStruct Tips and Tricks, go to the URL:
http://www.altairhyperworks.com/tips.aspx
************************************************************************
Following error/warning messages appeared too many times
and were suppressed:
1051
Total of 24 repeat message(s) were suppressed.
To see more messages use "MSGLMT" control card in the data or config file.
************************************************************************
There were 4 error messages during input processing.
The first message is repeated below:
*** ERROR # 1479 *** in the input data:
Incorrectly formatted numeric data in field 9.
(If it is a character field, it should start with a letter.)
Detected while reading line 95190 from file F:/zuizhongyouhuafenxi/2.fem:
"PBEAML 27 1 +"
************************************************************************
把第 95190 和95196 行尾的 加号 + 删除掉 TYNGOD 发表于 2012-3-17 12:25 static/image/common/back.gif
把第 95190 和95196 行尾的 加号 + 删除掉
大侠能再说的仔细一点吗？怎么去加好啊？？在哪去啊？？
TYNGOD 发表于 2012-3-17 12:25 static/image/common/back.gif
把第 95190 和95196 行尾的 加号 + 删除掉
求高手再给详细解释一下好吗？是在模型里面修改吗？？具体应该进行哪些操作啊？就是说具体问题是出在哪啊？？我是新手啊，前几个月整过一会，也没深研究，都忘了！！！！盼指教！！！ 在**.fem模型文件里
找到第 95190 和95196 行
看看是不是有PBEAML卡片
如果有的话，数一下第65-72个字段里是不是有个 "+" 号?
Bulk Data 格式，每8个字段是一个field， error 1479 说第9个field有问题的。( 8 *9 = 72 )
如果字符(character)的话，都要以字母开头，不能是"+"号 开头。
找找看吧
页:
[1]